Mã lỗi Samsung CLP600
Code:
01
Display: ACR Calibration
Description: During auto color registration, a system error occurs so that the registration fails or does not run.
Remedy: Turn the printer off, wait 30 secs and then turn it auto cleaning mode on.
Code:
02
Display: ADC Not Confirm Error
Description: A problem has occurred in the ADC in the printer.
Remedy: Replace the Main PBA if the same symptoms recur.
Code:
03
Display: Adjust Photo LED
Description: During auto color registration, the printer does not recognize the photo LED in the paper transfer belt assembly.
Remedy: Check the PTB Unit contact status or replace the PTB Unit.
Code:
04
Display: Cover Open
Description: The top cover or access door is open.
Remedy: Close the top cover or access door firmly.
Code:
05
Display: [Color] Toner Empty
Description: The corresponding toner cartridge in your printer is empty and the printer does not operate.
Remedy: Replace the corresponding toner cartridge with a new one.
Code:
06
Display: Engine Fuser Low Heat Error
Description: The temperature in the fuser is abnormally low.
Remedy: Unplug the power cord and plug it in again.
Code:
07
Display: Engine Fuser Over Heat Error
Description: The temperature in the fuser is abnormally high.
Remedy: Unplug the power cord and plug it in again.
Code:
08
Display: Engine LSU Error
Description: A problem has occurred in the LSU (Laser Scanning Unit) in the printer.
Remedy: Unplug the power cord and plug it in again.