Danh mục sản phẩm

Code :

Code: 01
Display: ACR Calibration
Description: During auto color registration, a system error occurs so that the registration fails or does not run.
Remedy: Turn the printer off, wait 30 secs and then turn it auto cleaning mode on.

Code: 02
Display: ADC Not Confirm Error
Description: A problem has occurred in the ADC in the printer.
Remedy: Replace the Main PBA if the same symptoms recur.

Code: 03
Display: Adjust Photo LED
Description: During auto color registration, the printer does not recognize the photo LED in the paper transfer belt assembly.
Remedy: Check the PTB Unit contact status or replace the PTB Unit.

Code: 04
Display: Cover Open
Description: The top cover or access door is open.
Remedy: Close the top cover or access door firmly.

Code: 05
Display: [Color] Toner Empty
Description: The corresponding toner cartridge in your printer is empty and the printer does not operate.
Remedy: Replace the corresponding toner cartridge with a new one.

Code: 06
Display: Engine Fuser Low Heat Error
Description: The temperature in the fuser is abnormally low.
Remedy: Unplug the power cord and plug it in again.

Code: 07
Display: Engine Fuser Over Heat Error
Description: The temperature in the fuser is abnormally high.
Remedy: Unplug the power cord and plug it in again.

Code: 08
Display: Engine LSU Error
Description: A problem has occurred in the LSU (Laser Scanning Unit) in the printer.
Remedy: Unplug the power cord and plug it in again.

1 2 3 4 > Last ›

0