Danh mục sản phẩm

Code :

Code: C5-3110, C5-3120
Display: Replace new Transfer roller
Description: The transfer roller has almost reached its estimated life.
Remedy: Replace the transfer roller with a new one.

Code: C6-1110
Display: Replace Fuser Soon
Description: The estimated life of fuser unit is close.
Remedy: Prepare a fuser unit for replacement.

Code: C6-1120
Display: Replace new Fuser unit
Description: The fuser unit has almost reached its estimated life.
Remedy: Replace the fuser unit with a new one

Code: C7-1311
Display: Not Installed Waste tank
Description: The waste toner container is not installed.
Remedy: Install the waste toner container.

Code: M1-1113
Display: Paper Jam in Tray1
Description: The paper has not reached the feed1 sensor within normal time after pick up.
Remedy: 1. Clear the jam. 2. Check if the holder pad or pick up roller rubber has worn out. Replace the holder pad or pick up roller. 3. If the problem persists, replace the pick up solenoid.

Code: M2-1211
Display: Paper Jam inside machine
Description: At power-on / warm up, the registration sensor has detected the paper.
Remedy: 1. Clear the jam. 2. Check if the holder pad or pick up roller rubber has worn out. Replace the holder pad or pick up roller. 3. If the problem persists, replace the pick up solenoid.

Code: M3-1111
Display: Paper Jam in exit area
Description: At power-on / warm up, the exit sensor has detected the paper.
Remedy: Clear the jam.

Code: M3-2130
Display: Output bin full Remove paper
Description: The output tray is full. Or the sensor is not facing down.
Remedy: Remove papers from the output tray, the machine resumes printing. Or make sure the sensor is facing down.

< 1 2 3 4 5 >

0