Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung ML1650 — Trang 4/5

Code: 25

Display: All LEDs blinking (Scan Error)
Description: 1. All lamps on the operator panel blink.
Causes: DCU Mode : Perform DCU diagnostic code 05. If the DCU error code 95 is displayed, replace LSU.

Code: 26

Display: Not function of the gear of the fuser due to melting away
Description: The motor breaks away from its place due to gear melting away.
Causes: DCU Mode : Check if the Error States '60' '62' '68' occur. Check the operation of Fuser Erasing Lamp On/Off with the Error Code Check -10-.

Code: 27

Display: Paper Empty
Description: The paper lamp on the operator panel is on even when paper is loaded in the cassette.
Causes: 1. Bending or deformation of the actuator of the paper sensor. 2. The function of the engine board is defective Perform DCU mode: Perform DCU diagnostic code 8.

Code: 28

Display: Paper Empty without indication
Description: The paper lamp on the operator panel does not come on when the paper cassette is empty.
Causes: 1. Bending or deformation of the actuator of the paper sensor. 2. The function of the engine board is defective Perform. DCU mode : Perform DCU diagnostic code 8.

Code: 29

Display: Cover Open
Description: The ERROR lamp is on even when the print cover is closed.
Causes: 1. The hook lever in the top cover may be defective. 2. Check the connector (CN1 : Engine Bfd.HVPS) and circuit of the cover switch department in the Main Control board. Perform DCU mode : If Error state '64' occurs, Check the related codes of the Cover Open Error.

Code: 30

Display: No lamp on when the cover is open
Description: The ERROR lamp does not come on even when the printer cover is open
Causes: 1. Check the connector(CN8) and circuit of the cover switch department in the Main Control board. Perform DCU mode : If Error state '64' occurs, Check the related codes of the Cover Open Error

Code: 31

Display: Defective motor operation
Description: Main motor is not driving when printing, and paper does not feed into the printer, resulting 'Jam 0'.
Causes: 1. Motor harness or sub PCB may be defective. 2. Perform DCU diagnostic code 00 and Check the motor operation.

Code: 32

Display: No Power
Description: When system power is turned on, all lamps on the operator panel do not come on.
Causes: 1. Check if the power input and SMPS output are normal. 2. Check the inferiority of LED-Panel on the front-cover if the LED of Panel does not appear after normal warmingup.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie