Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung ML1665

Code: 1-1130

Display: SMART PANEL:End of life, Replace with new toner cartridge
Description: 1. The toner cartridge has reached its estimated cartridge life. Print the supplies information report. And check the life count.
Remedy: 1. Open the Cover-Exit. 2. Replace the toner cartridge. 3. Close the Cover-Exit.

Code: C1-1110

Display: SMART PANEL:Prepare new toner cartridge
Description: 1. The toner cartridge has reached its estimated cartridge life.
Remedy: 1. Open the Cover-Exit. 2. Replace the toner cartridge. 3. Close the Cover-Exit.

Code: C1-1120

Display: SMART PANEL:End of life, Replace with new toner cartridge
Description: 1. The toner cartridge has reached its estimated cartridge life.
Remedy: 1. Open the Cover-Exit. 2. Replace the toner cartridge. 3. Close the Cover-Exit.

Code: C1-1411

Display: SMART PANEL:Toner cartridge is not installed. Install the cartridge.
Description: 1. The toner cartridge is installed improperly, or not installed.
Remedy: 1. Open the Cover-Exit. 2. Reinstall the toner cartridge two or three times to confirm it is seated properly. 3. Close the Cover-Exit.

Code: C1-1512

Display: SMART PANEL:Toner cartridge is not compatible. Check users guide
Description: 1. Ther toner cartridge is not suitable for your machine. 2. The print job can't be executed.
Remedy: 1. Prepare the Samsung-genuine toner cartridge. 2. Open the Cover-Exit. 3. Replace the toner cartridge. 4. Close the Cover-Exit.

Code: M1-1113

Display: SMART PANEL:Paper jam in tray 1.
Description: 1. Paper has jammed. (The paper has not reached the feed1 sensor within normal time after picking up it from the tray.)
Remedy: 1. Remove all papers on the tray. Remove the jammed paper from the machine. And reload the papers on the tray. 2. Adjust the paper guide to fix the papers. 3. Check the maximum paper capacity of the tray. Remove excess paper from the tray.

Code: M2-1211

Display: SMART PANEL:
Description: 1. Paper has jammed. (In case that the printer has turned on after turned it off for printing job or pick-up.)
Remedy: 1. Open the top cover. Check if the paper has jammed. If there is the jammed paper, remove it. 2. If the error message in Smart Panel is not disappered, check the Regi sensor and actuator. If they are defective, replace them.

Code: S2-4110

Display: SMART PANEL:Door is open. Close it.
Description: 1. Error LED on the control pane is blinking because the main door is opened.
Remedy: 1. Close the cover unit it locks into place. 2. If the problem persists, check the cover open sensor that is located on the HVPS board.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie