Description: LD (Laser Beam Detect) signal is abnormal.
Remedy: 1) Turn the machine off then on. 2) If the problem persists, check the followings. 3) Execute the LSU motor test in EDC mode. Check LSU motor operation sound. 4) If there is no sound, remove the right cover. Check if the FFC cable on main board (CN18) is connected properly. 5) It it is OK, remove the top cover. Check if the LSU connector is connected properly. 6) Check if the LSU harness is defective. 7) Reconnect the LSU harness and then execute the LSU motor test again. 8) If the LSU motor is not operated, replace the LSU. 9) If the LSU motor is not operated after replacing the LSU, replace the main board.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.