Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung Msys4800

Code: 01

Description: TEL LINE CANNOT BE ENGAGED (NO DIAL TONE)
Causes: • When you pick up the handset: 1 Check line cord connection and P3(LIU) connection. 2 Check hook switch of H/B Cradle and D2(LIU) connection. 3 Check the circuit around R2, Q1 and Q2 of LIU PBA. 4 Can’t you hear dial tone though the line is engaged? • When you press OHD key: 1 Check line cord connection. 2 Check U7(main PBA), main LIU harness, and P1(LIU PBA). 3 Check relaying operation of LIU PBA : Is the control signal of U18-49(main) high?
Remedy: • 1 Insert it correctly into the connection jack called “line”. 2 Replace defective parts. 3 Replace LIU PBA. 4 Replace the handset. • 1 Insert it correctly into the connection jack called line. 2 Replace defective parts. 3 Replace main PBA IF the control signal of U18-49(main) is low. Replace LIU PBA if high but phone line cannot be connected

Code: 02

Description: Cannot MF dial.
Causes: • Check U7(main PBA), main-LIU harness, and P1(LIU PBA) • Check signals of U16-122, 123.
Remedy: • Replace defective parts. • Replace main PBA if the signals of U16- 122(LIU_TXD) are abnormal. Replace LIU PBA if the signals of U16-123(LIU_RXD).

Code: 03

Description: MF dial is possible but not DP dial.
Causes: • Check DP control signal of U3-27 of LIU PBA and the circuit around R2, Q1 and Q2. • Check connection of R43 of LIU PBA.
Remedy: • Replace LIU PBA. • Replace LIU PBA.

Code: 04

Description: Defective fax transmission
Causes: • Check U7(main PBA), main LIU harness, and P1(LIU PBA). • a Is the external phone hooked off? b Is the output of U2-4(LIU PBA) low? • Check ‘hook off’. : Refer to ‘TEL LINE CANNOT BE ENGAGED’. • Check the control signals of U15-122, 123. • Check transmission path.: Check output of U15-44(main PBA) and input of U3-3(LIU PBA). • Check reception path.: Check output of U3-40(LIU PBA) and input of U15-45(main PBA).
Remedy: • Replace defective parts. • a Hook on the external phone correctly. b Replace LIU PBA if low. • Refer to TEL LINE CANNOT BE ENGAGED. • Replace main PBA if the signals of U15-122 (LIU_TXD) are abnormal. Replace LIU PBA if the signals of U15-123 (LIU_RXD) are abnormal. • Replace main PBA, if abnormal. • Replace LIU PBA if the output of U3-40 (LIU PBA) is not confirmed. Check the circuit around U6 (main PBA) if the input of U21-45 (main PBA) is not confirmed though the output of U3-40 (LIU PBA) is confirmed.

Code: 05

Description: Defective automatic fax reception
Causes: • Is the ring checked? Check ring pattern at U18-84(main PBA). • Refer to Defective Transmission.
Remedy: • Replace LIU PBA if it cannot be checked. • Refer to Defective Transmission.

Code: 06

Description: ASF feeds paper but paper is not supplied to the engine.
Causes: • Check if actuator feed operates perfectly. • Check if paper sensor is normal.
Remedy: • Replace actuator-feed, spring, or other defective parts. • Replace the paper sensor.

Code: 07

Description: ASF cannot feed paper.
Causes: • Check if stopper clutch operates perfectly. • Check if too much paper has been supplied. • Check if pickup roller rubber of the ASF is worn out.
Remedy: • Replace stopper clutch assembly. • Supply appropriate amount of paper(130 sheets of normal copying paper). • Replace pickup roller rubber.

Code: 08

Description: Can’t feed envelopes
Causes: • Check the location of the envelope guide of ASF.
Remedy: • Open the envelope guide when you feed envelopes.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie