Description: The image PC scanned is not clear or bad.
Causes: 1. Check the waveform form by performing a CCD test in TECH mode. (Refer to 4-2-5) 2. Check if the resolution is set too low in PC Scan options. (Refer to User's Manual.)
Description: The LCD screen is not turned on or has a strange display.
Causes: 1. Clear the memory. (Refer to page 4-2-4). 2. Confirm to catch a click sound, while a key on the OPE Panel is pressed on. 3. Check the status of Harness between LCD and OPE Panel, replace in order of the Main Board.
Description: The paper is jammed inside the set and not exited from.
Causes: 1. Check if the paper is crumpled or preprinted. 2. Check if too many sheets of recording paper are put into ASF (Automatic Sheet Feeder). (Standard : up to 100 sheets). 3. Check if the remaining papers are stuck in the Frame Base
Description: A recording paper is tilted while feeding.
Causes: 1. Check if the paper guide of ASF(Automatic Sheet Feeder) is set up properly with the width of recording paper. 2. Check if too many sheets of recording paper are put into ASF (Automatic Sheet Feeder). (Standard: up to 100 sheets). 3. Check if the recording paper is crumpled or preprinted.
Nhận ưu đãi sớm nhất khi chương trình diễn ra
Đăng ký nhận bản tin
Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này.
Chính sách cookie
Những cookie này là cần thiết để trang web hoạt động đúng cách.
Những cookie này giúp chúng tôi hiểu cách khách truy cập tương tác với trang web.
Những cookie này được sử dụng để cung cấp quảng cáo cá nhân hóa.