Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung SCX4016 — Trang 2/4

Code: 09

Display: Not functioning of the fuser gear due to melting away
Description: The Motor breaks away from its place due to gear melting away.
Causes: 1. Check the Heat Lamp.

Code: 10

Display: Paper Empty
Description: The paper lamp on the operator panel is on even when paper is loaded in the cassette.
Causes: 1. Bending or deformation of the actuator of the paper sensor. 2. The function of the Main PBA is defective Perform Engine Test Mode : Perform Engine Test Mode diagnostic code 2.

Code: 11

Display: Paper Empty without indication
Description: The paper lamp on the operator panel does not come on when the paper cassette is empty.
Causes: 1. Bending or deformation of the actuator of the paper sensor. 2. The function of the Main PBA is defective Perform.

Code: 12

Display: Door Open
Description: The ERROR lamp is on even when the print Door is closed.
Causes: 1. The hook lever in the Front Cover may be defective. 2. Check the Connector(CN1) and Circuit of the Cover Switch department in the Main PBA.

Code: 13

Display: No lamp on when the Door is open
Description: The ERROR lamp does not come on even when the printer Door is open.
Causes: Check the Connector(CN1) and Circuit of the Cover Switch department in the Main PBA.

Code: 14

Display: Defective Motor operation
Description: Main Motor is not driving when printing, and paper does not feed into the printer, resulting 'Jam 0'.
Causes: 1. Motor harness or sub PCB may be defective. 2. Perform Engine Test Mode diagnostic code 0 and Check the Motor operation.

Code: 15

Display: No Power
Description: When system power is turned on, all lamps on the operator panel do not come on.
Causes: 1. Check if the power input and SMPS output are normal. 2. Check for defective of LED-Panel on the front-cover if the LED of Panel does not appear after normal warming-up.

Code: 16

Display: Vertical Line Getting Curved
Description: When printing, vertical line gets curved.
Causes: 1. If the supply of +24v is unstable in the Main Control board linking with LSU, check drive by Engine Test Mode : Diagnostic Code 1 LSU Motor on.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie