Danh mục sản phẩm

Code :

Code: 33
Display: Over Heat Error Cycle Power
Description: There is a problem in the fuser unit.
Remedy: Unplug the power cord and plug it back in. If the problem persists, Replace to the Fuser Unit

Code: 34
Display: Paper Jam 0 Open/Close Doorel
Description: Paper has jammed in the feeding area of the tray.
Remedy: Clear the jam.

Code: 35
Display: Paper Jam 1 Open/Close Door
Description: Paper has jammed in the fuser area.
Remedy: Clear the jam.

Code: 36
Display: Paper Jam 2 Check Inside
Description: Paper has jammed in the paper exit area.
Remedy: Clear the jam.

Code: 37
Display: Power Failure
Description: Power has turned off then on and the machine's memory has not been back up.
Remedy: The job which you were trying to do before the power failure must be completely re-done.

Code: 38
Display: Replace Drum
Description: The drum cartridge is at the end of its life.
Remedy: Replace the drum cartridge.

Code: 39
Display: Retry Redial?
Description: The machine is waiting for a specified time interval to redial a previously busy station.
Remedy: You can press OK to immediately redial, or Stop/Clear to cancel the redial operation.

Code: 40
Display: Scanner locked
Description: The scanner module is locked
Remedy: Unlock the scanner and press Stop/Clear.

‹ First < 2 3 4 5 6 7 >

0