Danh mục sản phẩm

Code :

Code: 01
Display: Display Adjust scanner first in Maintenance menu
Description: The shading waveform to be used as a reference is corrupted due to unknown reason. Adjust the scanner to fix this problem
Causes: Scanner

Code: 02
Display: Check white paper document and try again
Description: The scanning level is too low to compare with reference level. To adjust shading, you should use the plain and white paper.
Causes: Scanner

Code: 03
Display: Clean white roller, glass and try again
Description: The scanning level is slightly low, which can affect the image quality. To clean concerned parts
Causes: Scanner

Code: 04
Display: Duplicated with [Speed No.xx ] The xx indicates the location number.
Description: The same number has already been registered into another speed dial location.
Causes: Telephone

Code: 05
Display: Exceeded Job Memory Cancel scheduled job and try again
Description: The broadcasting and delayed fax can hold 5 jobs in total. Cancel scheduled job and try again.
Causes: Fax

Code: 06
Display: Exceeded Total Message Memory
Description: The machine can hold up to 100 messages (OGM + ICM + recorded conversations). Erase old messages to make a room in the memory.
Causes: TAM (SF-335T only)

Code: 07
Display: ICM Memory Full
Description: The voice memory is full. No more caller’s messages can be recorded (Total recording time is about 15 minutes).
Causes: TAM (SF-335T only)

Code: 08
Display: Ink Low.Install new ink cartridge
Description: The print cartridge has run out of ink. To install a new Print Car- tridge, see "Replacing the print cartridge" on page 4.16. Although this message is displayed, you can make a copy or print a report. But, stored data in memory can be printed by changing the cartridge.
Causes: Cartridge

1 2 3 4 >

0