Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung SF650P — Trang 4/5

Code: 24

Display: Cancel ? 1:Yes 2:No
Description: Your machine’s memory has become full while documents were being loaded into memory.
Remedy: To cancel the fax job, press the No 1 button Yes. If you want to send the pages already stored, press the No 2 button No. You should send the remaining pages later when the memory is available.

Code: 25

Display: Operation Not Assigned
Description: You are doing in the Add/Cancel operation, but there is no jobs waiting.
Remedy: Check the display to see if there is any scheduled job. The display should indicate them in standby mode, for example, Delay Fax.

Code: 26

Display: [Low Heat Error]
Description: Temperature could not reach certain level.
Remedy: Refer to the flow chart of the fuser problem.

Code: 27

Display: Open Heat Error
Description: The thermistor has been disconnected.
Remedy: Refer to the flow chart of the fuser problem.

Code: 28

Display: [Over Heat]
Description: Temperature has gone up very high degree.
Remedy: Refer to the flow chart of the fuser problem.

Code: 29

Display: [Jam 1] or [No Cartridge]
Description: There is no Cartridge in MFP.
Remedy: Install the toner cartridge.

Code: 30

Display: Toner Exhausted Replace Toner
Description: The cartridge is out of toner.
Remedy: Replace the toner cartridge.

Code: 31

Display: Toner Empty Replace Toner
Description: Toner is empty, replace or order for new toner.
Remedy: Replace the toner cartridge.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie