Danh mục sản phẩm

Code :

Code: 01
Display: RETRY REDIAL?
Description: The machine is waiting for the programmed interval to automatically redial.
Remedy: You can press START to immediately redial, or STOP to cancel the redial operation.

Code: 02
Display: COMM. ERROR
Description: A problem with the facsimile communications has occurred.
Remedy: Try again.

Code: 03
Display: DOCUMENT JAM
Description: Loaded document has Jammed in the feeder When Document Jam aeeurred at ADF module
Remedy: Clear the document Jam.

Code: 04
Display: DOOR OPEN
Description: The side cover is not securely latched.
Remedy: Clear the cover until it clicks in place.

Code: 05
Display: GROUP NOT AVAILABLE
Description: You have tried to select a group location where only a single location number can be used, such as when adding locations for a multi-dial operation.
Remedy: Try again, check location for group.

Code: 06
Display: LINE ERROR
Description: Your unit cannot connect with the remote machine, or has lost contact because of a problem on the phone line. When the machine has a problem in cause of fax data reception step
Remedy: Try again. If failure persists, wait an hour or so for the line to clear then try again.

Code: 07
Display: LOAD DOCUMENT
Description: You have attempted to set up a sending operation with no document loaded.
Remedy: Load a document and try again.

Code: 08
Display: MEMORY FULL
Description: The memory has become full.
Remedy: Either delete unnecessary documents, or retransmit after more memory becomes available, or split the transmission into more than one operation.

1 2 3 >

0