Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung SLC460FW — Trang 3/5

Code: C3-6110, C3-6120

Display: Prepare new Imaging unit Replace with new imaging unit
Description: The imaging unit is at the end of its life.
Remedy: 1) If its life is at the end, turn the machine off and replace the imaging unit with new one.

Code: C3-6410

Display: Install Imaging unit
Description: The imaging unit is not installed.
Remedy: 1) Open the front cover. Remove the YMCK toner cartridges and waste toner container. 2) Check if the imaging unit is installed. 3) Remove and reinstall it.

Code: C3-6520

Display: Error: #C3-6520 Door open/close
Description: The imaging unit is not compatible.
Remedy: 1) Open and close the front cover. 2) Turn the machine off then on. If the error persists, turn the machine off again. 3) Check if the imaging unit is installed. 4) Remove and reinstall it. 5) If the problem persists, replace the imaging unit with new one.

Code: C5-1110, C5-1120

Display: Prepare new Transfer belt Replace new Transfer belt
Description: The ITB Unit is at the end of its life.
Remedy: 1) If its life is at the end, turn the machine off and replace the ITB unit with new one.

Code: C5-1710

Display: Transfer Belt Error
Description: The ITB home sensor is defective.
Remedy: 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove and reinstall the ITB unit. 3) Check if the ITB home sensor connector is connected correctly. 4) If the problem persists, replace the ITB unit.

Code: C5-3110, C5-3120

Display: Prepare new Transfer roller Replace new Transfer roller
Description: The transfer roller is at the end of its life.
Remedy: 1) If its life is at the end, turn the machine off and replace the transfer roller Assy with new one.

Code: C6-1110, C6-1120

Display: Prepare new fuser unit. Replace with new fuser unit.
Description: The fuser unit is at the end of its life.
Remedy: 1) Print the supply information report. Check the life remaining of the fuser unit. 2) If its life is at the end, turn the machine off and replace the fuser unit with new one.

Code: C7-1311

Display: Waste toner container is not installed. Install it.
Description: The waste toner container is not installed
Remedy: 1) Check if the waste toner container is installed properly. 2) Remove and reinstall the waste toner container.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie