Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Samsung SLM3875FD — Trang 4/9

Code: C3-1120

Display: Prepare IMG. Unit / Prepare new imaging unit Replace IMG. Unit / Replace with new imaging unit
Description: The remaining imaging unit is less than 10% / The imaging unit is at the end of its life.
Remedy: These errors are for M3325/3825/4025. Check the life remaining of the imaging unit. If its life is at the end, turn the machine off and replace the imaging unit with new one.

Code: C3-1144

Display: Prepare IMG. Unit / Prepare new imaging unit Replace IMG. Unit / Replace with new imaging unit
Description: The remaining imaging unit is less than 10% / The imaging unit is at the end of its life.
Remedy: These errors are for M3325/3825/4025. Check the life remaining of the imaging unit. If its life is at the end, turn the machine off and replace the imaging unit with new one.

Code: C3-1410

Display: IMG. Not Installed / Imaging unit is not installed. Install the unit
Description: The imaging unit is not installed
Remedy: This error is for M3325/3825/4025. 1) Turn the machine off then on. 2) Open the front cover. 3) Check if the imaging unit is installed. If yes, remove and reinstall it. 4) If the problem persists, replace the imaging unit with new one.

Code: C3-1510

Display: IMG. Not compatible / Imaging unit is not compatible. Check guide
Description: Imaging unit is not compatible.
Remedy: This error is for M3320/3820/4020. 1) Open the front cover. 2) Remove the toner cartridge and imaging unit. 3) If the imaging unit is not a Samsung genuine imaging unit, replace with new one.

Code: C9-1112

Display: Replace pickup roller / Replace with new tray 1 pickup roller
Description: Tray1 pick up roller is worn out.
Remedy: 1) Remove the tray 1 cassette. 2) Remove the duplex unit. 3) Pull the small tap down, then release the pick up roller(JC73-00340A). 4. Alignment and Troubleshooting

Code: C9-1115

Display: Replace retard roller / Replace with new tray 1 retard roller
Description: Tray1 reverse roller is worn out.
Remedy: 1) Remove the tray1 cassette. 2) Remove the reverse roller(JC90-01032A).

Code: C9-1122

Display: Replace pickup roller / Replace with new tray 2 pickup roller
Description: Tray2 pick up roller is worn out.
Remedy: 1) Remove the Tray 2 cassette. 2) See the bottom of the SCF Unit. 3) Pull the small tap down, then release the pick up roller(JC97-02259A).

Code: C9-1125

Display: Replace retard roller / Replace with new tray 2 retard roller
Description: Tray2 reverse roller is worn out.
Remedy: 1) Remove the Tray 2 cassette. 2) Open the cassette cover. 3) Pull the small tap down, then release the reverse roller(JC97-02259A).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie