• Code: E7-01
• Description: Duplex model memory setup error, memory not-detected error
• Causes: The memory is not set properly or the memory capacity is not set to the duplex setup (6M). Cancel method: Set SIM 26-39 code number to 2.

• Code: E7-02
• Description: HSYNC not detected.
• Causes: LSU (laser diode, reception element, APC circuit) trouble LSU drive circuit (ASIC) trouble

• Code: E7-10
• Description: CCD black level trouble
• Causes: CCD drive circuit (CCD PWB, ASIC, harness) trouble

• Code: E7-11
• Description: CCD white level trouble
• Causes: CCD drive circuit (CCD PWB, ASIC harness) trouble Copy lamp lighting trouble (Copy lamp, inverter PWB)

• Code: E7-12
• Description: Shading trouble (White correction)
  
• Causes: Dirt on white plate for scanning white level

• Code: E7-16
• Description: Laser output trouble
• Causes: LSU (laser diode, reception element, APC circuit) trouble LSU drive circuit (ASIC) trouble

• Code: F5-02
• Description: Copy lamp disconnection trouble
• Causes: Copy lamp or copy lamp drive circuit (inverter PWB) trouble Copy lamp disconnection

• Code: H2-00
• Description: Thermistor open detection
• Causes: The fusing thermistor is open.