Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp AR163 — Trang 5/6

Code: L4 01

Description: Main motor lock. The main motor encoder pulse is not detected for 400msec.
Causes: Main motor defect Harness disconnection between the MCU PWB and the main motor. Control circuit failure
Remedy: Check the main motor operation with SIM 25-1. Check the harness and the connector between the MCU PWB and the main motor.

Code: L6 10

Description: Polygon motor lock. The lock signal (the specified rotation speed signal) is not supplied within the specified time (about 6 sec)after starting the polygon motor rotation.
Causes: LSU connector disconnection or harness disconnection in the LSU.
Remedy: Check the operation of the polygon motor with SIM 25-10. Check the harness and the connector connection. LSU replacement

Code: L8 01

Description: Zero cross pulse width is shifted by 55Hz ± 10% or more.
Causes: MCU PWB defect Power unit breakdown
Remedy: Check the harness and the connector. MCU PWB replacement Power unit replacement

Code: U2 04

Description: Error in communication with EEPROM
Causes: EEPROM failure Installation of uninitialized EEPROM MCU PWB EERPOM access circuit failure
Remedy: Check that the EEPROM is properly set. To prevent against loss of counter/adjustment values, record the values with simulation. U2 trouble cancel with SIM 16 MCU PWB replacement

Code: U2 11

Description: Counter check sum error. Counter check sum value stored in the EEPROM is abnormal.
Causes: EEPROM failure Control circuit hung up by noises MCU PWB EEPROM access circuit defect
Remedy: Check that the EEPROM is properly set. To prevent against loss of counter/adjustment values, record the values with simulation. U2 trouble cancel with SIM 16 MCU PWB replacement

Code: U2 12

Description: Adjustment value check sum error (EEPROM). Adjustment value data area check sum error
Causes: EEPROM failure Control circuit hung up by noises MCU PWB EEPROM access circuit failure
Remedy: Check that the EEPROM is properly set. To prevent against loss of counter/adjustment values, record the values with simulation. U2 trouble cancel with SIM 16 MCU PWB replacement

Code: U3 29

Description: Home position is not detected when starting mirror base shift.
Causes: Mirror unit defect Mirror home position sensor defect MCU PWB decfect Scanner wire disconnection
Remedy: Check the scanning operation with SIM 1-1.

Code: U9 00

Description: Communication trouble between MCU and OPE (OPE detection). Communication setup error, framing, parity, protocol error
Causes: Operation control PWB connector disconnection Operation control PWB MCU PWB harness failure
Remedy: Check the connectors and harness of the operation control PWB and the MCU PWB. Check grounding of the machine. Check the ROM of the operation control PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie