Mã lỗi Sharp AR281 — Trang 10/11
Code:
Tất cả lỗi (87)
C1 00
C2 00
E7 00
E7 01
E7 02
E7 03
E7 10
E7 11
E7 13
E7 90
EE EL
EE EU
F1 00
F1 01
F1 02
F1 03
F1 04
F1 05
F1 06
F1 08
F1 10
F1 11
F1 14
F1 15
F1 16
F1 17
F1 18
F1 50
F1 80
F2 00
F2 02
F2 31
F2 32
F2 37
F2 39
F3 12
F3 22
F9 00
F9 01
F9 03
F9 04
F9 10
F9 90
FC 00
FC 01
H2 00, H2 HL1
H2 01, H2 HL2
H3 00, H3 HL1
H3 01, H3 HL2
H4 00, H4 HL1
H4 01, H4 HL2
H5 01
H5 02
L1 00
L3 00
L4 01
L6 10
L8 01
L8 02
PF 00
U2 00
U2 11
U2 12
U4 02
U4 03
U5 00
U5 01
U5 02
U5 03
U5 06
U5 07
U5 08
U5 11
U5 16
U6 00
U6 01, U6 02, U6 03
U6 08
U6 09
U6 10
U6 20
U6 21
U6 22
U6 50
U6 51
U7 00
U9 00
U9 90
Description: RADF paper feed motor operation abnormality. Paper feed motor driving error
Causes: Motor lock Improper motor speed Overcurrent to motor RADF control PWB defective
Remedy: Check paper feed motor operation with SIM2-3,4.
Description: RSPF fan motor operation abnormality. An abnormality is detected by the input of RSPF fan motor alarm signal.
Causes: Motor lock. RSPF control PWB trouble. Bad connection of RSPF motor harness.
Remedy: Check the fan motor operation with SIM2-2.
Description: Desk communication trouble. Failed communication with desk Communication line test error occurs when power is turned on or after the exit of a simulation mode.
Causes: Improper connection or broken wire of connector or harness Desk control PWB defective Control PWB (PCU) defective Malfunction due to noise.
Remedy: Clear the trouble by turning the power supply On/Off. Check communication line connector and harness.
Description: Desk 1, 2, 3 CS lift-up trouble. Desk cassette lift-up trouble (1st - 3rd cassettes).
Causes: Defective sensor RADF control PWB defective Broken gear Lift-up motor defective
Remedy: Check lift-up sensor detection with SIM4-2. Check lift-up motor with SIM4-3.
Description: Desk 24-V power abnormality. No supply of DC24V to desk
Causes: Improper connection or broken wire of connector or harness Desk control PWB defective Power supply unit defective
Remedy: Check power supply line connector and harness. Check 24-V voltage on power supply unit and desk control PWB.
Description: LCC lift motor trouble
Causes: Sensor trouble LCC control PWB trouble Gear breakage Lift motor trouble
Remedy: Check the sensor detection with SIM 4-2. Check the lift motor operation with SIM 4-3.
Description: Desk transport motor operation trouble
Causes: Motor lock Improper motor speed Overcurrent to motor RADF control PWB defective
Remedy: Check transport motor operation with SIM4-6.
Description: LCC communication trouble Error when power is turned on or in communication line test after exiting SIM.
Causes: Connector harness improper connection or disconnection LCC control PWB trouble Control PWB (PCU) trouble Malfunction by noise
Remedy: Canceled by turning on the power. Check the connector and harness of the communication line.