Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp AR286 — Trang 10/11

Code: U5 11

Description: RADF paper feed motor operation abnormality. Paper feed motor driving error
Causes: Motor lock Improper motor speed Overcurrent to motor RADF control PWB defective
Remedy: Check paper feed motor operation with SIM2-3,4.

Code: U5 16

Description: RSPF fan motor operation abnormality. An abnormality is detected by the input of RSPF fan motor alarm signal.
Causes: Motor lock. RSPF control PWB trouble. Bad connection of RSPF motor harness.
Remedy: Check the fan motor operation with SIM2-2.

Code: U6 00

Description: Desk communication trouble. Failed communication with desk Communication line test error occurs when power is turned on or after the exit of a simulation mode.
Causes: Improper connection or broken wire of connector or harness Desk control PWB defective Control PWB (PCU) defective Malfunction due to noise.
Remedy: Clear the trouble by turning the power supply On/Off. Check communication line connector and harness.

Code: U6 01, U6 02, U6 03

Description: Desk 1, 2, 3 CS lift-up trouble. Desk cassette lift-up trouble (1st - 3rd cassettes).
Causes: Defective sensor RADF control PWB defective Broken gear Lift-up motor defective
Remedy: Check lift-up sensor detection with SIM4-2. Check lift-up motor with SIM4-3.

Code: U6 08

Description: Desk 24-V power abnormality. No supply of DC24V to desk
Causes: Improper connection or broken wire of connector or harness Desk control PWB defective Power supply unit defective
Remedy: Check power supply line connector and harness. Check 24-V voltage on power supply unit and desk control PWB.

Code: U6 09

Description: LCC lift motor trouble
Causes: Sensor trouble LCC control PWB trouble Gear breakage Lift motor trouble
Remedy: Check the sensor detection with SIM 4-2. Check the lift motor operation with SIM 4-3.

Code: U6 10

Description: Desk transport motor operation trouble
Causes: Motor lock Improper motor speed Overcurrent to motor RADF control PWB defective
Remedy: Check transport motor operation with SIM4-6.

Code: U6 20

Description: LCC communication trouble Error when power is turned on or in communication line test after exiting SIM.
Causes: Connector harness improper connection or disconnection LCC control PWB trouble Control PWB (PCU) trouble Malfunction by noise
Remedy: Canceled by turning on the power. Check the connector and harness of the communication line.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie