• Code: CE-07
• Description: The entered account name of the POP3 server or the password for authentication is invalid.
  The entered account name of the POP3 server or the password for authentication is invalid. POP3 server authentication check error
• Causes: Improper connection of the network cable Improper account name or password registered in the POP3 server
• Remedy: 1. Check connection of the network cable. 2. Check that the account name or the password registered for the POP3 server is correct.

• Code: CE-08
• Description: The specified mail server (POP3) is not found.
  The specified mail server (POP3) is not found. POP3 server time out error
• Causes: Improper connection of the network cable An error occurs in the POP3 server.
• Remedy: 1. Check connection of the network cable. 2. Check for any error in the POP3 server.

• Code: E6-11
• Description: CSI shading trouble (White correction)
  The CIS white reference plate scan level is abnormal when the lamp is on.
• Causes: Abnormal harness installation to CIS unit Dirt on the white reference plate. CIS lighting error CIS unit installation trouble CIS unit abnormality Scanner PWB abnormality
• Remedy: Clean the white reference plate. Check CIS light quantity (SIM 5-3) and lighting. Check CIS unit harness. Check scanner PWB.

• Code: E6-14
• Description: CIS communication trouble
  Communication trouble (clock sync) between scanner PWB and CIS-ASIC
• Causes: Abnormal harness installation to CIS unit CIS unit abnormality Scanner PWB abnormality
• Remedy: Check CIS unit harness. Check CIS unit. Check scanner PWB.

• Code: E7-01
• Description: System data trouble
  When in data storage/acquiring of the HDD system area, the HDD responds an error and does not respond for 30sec, it is judged as a trouble.
• Causes: The HDD is not properly installed to the ICU PWB. The HDD does not work for the ICU PWB. ICU PWB abnormality
• Remedy: Check installation of the HDD to the ICU PWB. Check harness connection of the HDD from the ICU PWB. Use SIM62-2, 3 to check the HDD read/write. Replace the HDD. Replace the ICU PWB.

• Code: E7-02
• Description: Laser trouble
  BD signal from LSU is kept OFF, or ON.
• Causes: The connector of LSU or the harness in LSU is disconnected or broken. The polygon motor does not rotate normally. The laser home position sensor in LSU is shifted. The proper voltage is not supplied to the power line for laser. Laser emitting diode trouble PCU PWB trouble ICU PWB trouble
• Remedy: Check for disconnection of the LSU connector. Use SIM 61-1 to check LSU operation. Check that the polygon motor rotates normally or not. Check light emission of laser emitting diode. Replace the LSU unit. Replace the PCU PWB. Replace the ICU PWB.

• Code: E7-03
• Description: HDD trouble
  HDD connection failure If the HDD responds an error or does not respond for 30sec, it is judged as an error. (Other than the system area) Data abnormality in the file management area (when the cluster chain is broken)
• Causes: HDD is not installed properly to the ICU PWB. HDD does not operate properly in the ICU PWB. ICU PWB trouble
• Remedy: Check installation of HDD to the ICU PWB. Check connection of the harness of HDD to the ICU PWB. Use SIM 62-2, -3 to check read/write of HDD. Replace HDD. Replace ICU PWB.

• Code: E7-06
• Description: Decode error trouble
  A decode error occurs during making of an image.
• Causes: Data error during input from PCI to PM. PM trouble Data error during image compression/ transfer. ICU PWB abnormality
• Remedy: Check insertion of the PWB. (PCI bus) If the error occurred in a FAX job, check installation of the FAX PWB. For the other cases, check the ICU PWB. Replace the ICU PWB.