Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp AR351FP — Trang 9/14

Code: F2-58

Description: Process humidity sensor breakdown
Process humidity sensor open or short
Causes: Temperature/humidity sensor harness connection failure Temperature/humidity sensor abnormality PCU PWB trouble
Remedy: Check connection of the harness and the connector of the temperature/ humidity sensor. Replace the temperature/humidity sensor. Check PCU PWB.

Code: F3-12

Description: Machine no. 1 tray lift-up trouble
LUD does not turn ON in the specified time.
Causes: LUD trouble No. 1 tray lift-up trouble Check connection of harness between the PCVU PWB, lift-up unit, and paper feed unit.
Remedy: Check LUD, and their harness and connectors. Check the lift-up unit.

Code: F3-22

Description: Machine tray 2 lift-up trouble
MCLUD does not turn ON in the specified time.
Causes: MCLUD trouble No. 2 tray lift-up motor trouble Harness disconnection f the PCU PWB, the lift-up unit, and the paper feed unit.
Remedy: Check MCLUD, and their harness and connectors. Check the lift-up unit.

Code: F6-00

Description: Communication trouble (ICU detection) between ICU and FAX
Communication establishment error/ Fleming/Parity/Protocol error
Causes: Slave unit PWB connector disconnection Harness abnormality between slave unit PWB and ICU PWB. Slave unit PWB mother board connector pin breakage Slave unit ROM abnormality/No ROM/ Reverse insertion of ROM/ROM pin breakable
Remedy: Check connector harness between slave unit PWB and ICU PWB. Check grounding of machine. Check slave unit PWB ROM.

Code: F6-01

Description: FAX expansion flash memory abnormality (ICU detection)
Flash memory cannot be deleted.
Causes: Flash memory cannot be deleted.
Remedy: Check the FAX image storage Flash memory. Use SIM 66-10 to clear the flash memory.

Code: F6-04

Description: FAX modem operation abnormality
FAX PWB modem chip operation abnormality
Causes: SW101 in the FAX PWB tries to perform normal operation on the boot side. Modem chip operation abnormality in FAX PWB
Remedy: Set SW101 on the FAX PWB to other than the boot side, and turn on the power again. Replace FAX PWB.

Code: F6-20

Description: FAX write protect cancel
The write protect JP is released.
Causes: The write protect JP is set to “write allow.” FAX interface PWB trouble FAX PWB trouble
Remedy: Check the write protect JP. Replace the FAX PWB. Replace the FAX interface PWB.

Code: F6-21

Description: Combination abnormality of the TEL/ LIU PWB and the FAX soft switch
Combination abnormality of the TEL/ LIU PWB and the FAX PWB information (soft switch) Or the TEL/LIU PWB is not a new one for new MDMC PWB.
Causes: The destination of the installed TEL/LIU PWB differs. The FAX PWB information (soft switch) differs. TEL/LIU PWB trouble
Remedy: Check the destination of the TEL/LIU PWB. Check the FAX PWB information (soft switch). Replace the TEL/LIU PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie