Mã lỗi Sharp ARC200P — Trang 8/10
Display: Open/close cover 326: Paper thickness error
Description: U-Heavy mode media detect value out of range.
Causes: Is different media type mixed in?
Display: Reset belt 330: Belt error
Description: Same unit not detected upon power ON or closing cover.
Causes: 1) Is error message displayed? 2) Is belt unit set properly? 3) Does error reoccur?
Display: Reset drum 330-343: Drum error
Description: Same as above.
Causes: 1) Is error message displayed? 2) Is image drum set properly? 3) Does error reoccur?
Display: Set new drum 350: Yellow drum life 351: Magenta drum life 352: Cyan drum life 353: Black drum life
Description: ID unit life.
Causes: Right after replacing ID unit?
Display: Set new fuser 354: Fuser life
Description: Fuser life (occurs when fuser life continuation is OFF).
Causes: Right after replacing fuser?
Display: Set new belt 355: Belt life
Description: Belt life notified (alarm). Print N-count by opening and closing cover.
Causes: Right after replacing belt?
Display: Set new belt 356: Belt life
Description: Waste toner belt life notified (alarm). Print N-count by opening and closing cover. N=20
Causes: Right after replacing belt?
Display: Set duplex unit 360: Duplex unit is open.
Description: When duplex unit is removed from printer.
Causes: Does error recover by resetting duplex unit?