Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp ARM208 — Trang 9/10

Code: U2 11

Description: Counter check sum value stored in the EEPROM is abnormal.
Causes: EEPROM defective ICU PWB EEPROM access circuit failure
Remedy: Check that the EEPROM is properly set. Clear trouble with SIM 16. Replace the MCU PWB. Remarks Checksum error in counter data area

Code: U2 12

Description: Adjustment value check sum error (EEPROM)
Causes: EEPROM defective ICU PWB EEPROM access circuit failure
Remedy: Check that the EEPROM is properly set. Clear trouble with SIM 16. Replace the MCU PWB. Remarks Checksum error in adjustment value data area

Code: U2 20

Description: Machine speed code data error. The machine information is not identical to the model code speed information.
Causes: EEPROM defective SIM operation error
Remedy: Check that the machine set with SIM 26- 57 is identical to the model information. Remarks When the boot program speed code does not match with the body model information.

Code: U2 40

Description: Error in MCU-CRUM chip communication
Causes: CRUM chip failure Developing unit contact trouble MCU PWB failure
Remedy: Replace the CRUM chip. Check installation of the developing unit. Clear the trouble with SIM 16. Replace the MCU PWB.

Code: U7 00

Description: Error in communication with RIC Error in communication test after turning on the power or canceling SIM.
Causes: Connector harness contact trouble or disconnection RIC control PWB trouble MCU PWB failure Malfunction by noises
Remedy: check the communication cable connectors from the RIC box to the main body.

Code: U9 00

Description: MCU-OPE communication trouble Details Communication establishment error/ framing/parity/protocol error
Causes: Operation control PWB connector disconnection Operation control PWB MCU PWB harness failure
Remedy: Check the connectors and harness of the operation control PWB and MCU PWB. Check the grounding of the copier. Check ROM on the operation control PWB.

Code: U9 80

Description: Communication trouble between MCU and the operation control PWB (Protocol error)
Causes: Operation control PWB connector disconnection Operation control PWB MCU PWB harness failure
Remedy: Check the connectors and harness of the operation control PWB and MCU PWB. Check the grounding of the copier.

Code: U9 81

Description: Operation control PWB communication trouble (Parity). Communication trouble between MCU and the operation control PWB (Parity error)
Causes: Operation control PWB connector disconnection Operation control PWB MCU PWB harness failure
Remedy: Check the connectors and harness of the operation control PWB and MCU PWB. Check the grounding of the copier.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie