Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp ARM257 — Trang 9/13

Code: F9-88

Description: Printer PWB communication trouble (Timeout)
Communication trouble between MCU and printer PWB (Timeout error)
Causes: Printer PWB connector disconnection Harness trouble between the printer PWB and the MCU PWB Motherboard connector pin breakage Printer PWB ROM trouble/Data disturbance
Remedy: Check the connectors and the harness of the printer PWB and MCU PWB. Check the grounding of the copier. Check ROM on printer PWB.

Code: F9-95

Description: Incompatibility error of AR-F14N and PCL/ GDI PWB
PCL/GDI PWB incompatible with AR-F14N and AR-F14N was installed to the copier
Causes: PCL/GDI PWB is incompatible
Remedy: Install the PCL/GDI PWB compatible with AR-F14N

Code: F9-96

Description: PCL PWB incompatibility error
Incompatible PCL PWB was installed to the copier
Causes: AR-P17 was installed.
Remedy: Install the AR-P27 to the copier

Code: F9-99

Description: Machine-PCL board language error
The machine language setup does not coincide with the PCL board language setup.
Causes: PCL board connection error SIM setup error
Remedy: Check combination between the firmware on PCL board and the panel screen data, and download the correct version, if necessary. Check the machine language information. (Machine language setup: SIM 26-22)

Code: H2-00

Description: Main heater lamp thermistor open hard detection
Main heater lamp thermistor open detection Fusing unit not installed
Causes: Thermistor defect Control PWB failure Fusing section connector contact failure Fusing unit not installed
Remedy: Check the harness and the connector of the thermistor and the MCU.

Code: H2-01

Description: Sub heater lamp thermistor open hard detection
Sub heater lamp thermistor open detection Fusing unit not installed
Causes: Thermistor defect Control PWB failure Fusing section connector contact failure Fusing unit not installed
Remedy: Check the harness and the connector of the thermistor and the MCU.

Code: H3-00

Description: Main heater lamp abnormally high temperature hard detection trouble
The fusing main heater thermistor causes abnormally high temperature.
Causes: Main heater lamp thermistor defect Control PWB failure Fusing section connector contact failure
Remedy: Check the main heater lamp blinking with SIM 5-2-1. When the lamp blinks normally: Check the thermistor and the harness. Check the MCU PWB thermistor input circuit. If lamp lights and stays lit: Check the power circuit and the lamp control circuit on MCU PWB. Clear the display of self-diagnostics with SIM 14.

Code: H3-01

Description: Sub heater lamp abnormally high temperature hard detection troubl
The fusing sub heater thermistor causes abnormally high temperature.
Causes: Sub heater lamp Thermistor defect Control PWB failure Fusing section connector contact failure
Remedy: Check the sub heater lamp blinking with SIM 5-2-2. When the lamp blinks normally: Check the thermistor and the harness. Check the MCU PWB thermistor input circuit. If lamp lights and stays lit: Check the power circuit and the lamp control circuit on MCU PWB. Clear the display of self-diagnostics with SIM 14.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie