Mã lỗi Sharp ARM280N — Trang 12/12
Description: Desk No. 3 tray/LCC2 lift-up trouble
Causes: Sensor trouble Desk control PWB trouble Gear breakage Lift-up motor trouble
Remedy: Use DIAG (SIM4-2) to check the lift-up sensor detection. Use DIAG (SIM4-3) to check the lift-up motor operation.
Description: Desk/LCC transport motor trouble
Desk/LCC transport motor operation trouble
Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Desk control PWB trouble
Remedy: Use DIAG (SIM4-3) to check the transport motor operation.
Description: RIC communication trouble
RIC communication trouble Communication cable test error after turning on the power or exiting DIAG.
Causes: Disconnection of connector and harness RTC control PWB trouble Control PWB (Controller) trouble Noise or interference
Remedy: Canceled by turning OFF/ON the power. Check connector and harness in the communication line.