• Code: F1-32
• Description: Communication trouble between the console finisher (AR-FN7) and the punch unit (AR-PN1).
  Communication err between the console finisher and the punch unit.
• Causes: Improper connection or disconnection of connector and harness between the console finisher and the punch unit. Console finisher control PWB trouble Control PWB (PCU) trouble Malfunction by noise
• Remedy: Canceled by turning OFF/ON the power. Check connectors and harness in the communication line. Replace the console finisher control PWB.

• Code: F1-33
• Description: Console finisher (AR-FN7) punch (AR-PN1) side registration motor trouble
  Punch side registration motor operation abnormality
• Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
• Remedy: Use DIAG (SIM3-3) to check the motor operation.

• Code: F1-34
• Description: Console finisher (AR-FN7) punch (AR-PN1) motor trouble
  Punch motor operation abnormality
• Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
• Remedy: Use DIAG (SIM3-3) to check the motor operation.

• Code: F1-35
• Description: Console finisher (AR-FN7) punch (AR-PN1) side registration sensor trouble
  Sensor input value abnormality
• Causes: Sensor breakage Harness disconnection Console finisher control PWB trouble
• Remedy: Use DIAG (SIM3-2) to check the sensor operation.

• Code: F1-36
• Description: Console finisher (AR-FN7) punch (AR-PN1) timing sensor trouble
  Sensor input value abnormality
• Causes: Sensor breakage Harness disconnection Console finisher control PWB trouble
• Remedy: Use DIAG (SIM3-2) to check the sensor operation.

• Code: F1-37
• Description: Console finisher (AR-FN7) backup RAM trouble
  Backup RAM contents are disturbed.
• Causes: Console finisher control PWB trouble Malfunction by noise
• Remedy: Replace the console finisher control PWB.

• Code: F1-38
• Description: Console finisher (AR-FN7) punch (AR-PN1) backup RAM trouble
  Punch unit backup RAM contents are disturbed.
• Causes: Punch control PWB trouble Malfunction by noise
• Remedy: Replace the punch control PWB.

• Code: F1-80
• Description: Mail-bin stacker (AR-MS1) power abnormality
  The 24V power is not supplied to the Mail-bin stacker PWB.
• Causes: Improper connection or disconnection of connector and harness Mail-bin stacker control PWB trouble Power unit (AR-DC1) trouble
• Remedy: Use DIAG (SIM3-2) to check the sensor.