Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp ARM450 — Trang 8/12

Code: F3-12

Description: Machine no. 1 tray lift-up trouble
PED does not turn ON in the specified time. LUD does not turn ON in the specified time.
Causes: PED/LUD trouble No. 1 tray lift-up trouble Check connection of harness between the PCVU PWB, lift-up unit, and paper feed unit.
Remedy: Check PED, LUD, and their harness and connectors. Check the lift-up unit.

Code: F3-22

Description: Multi purpose tray lift-up trouble
MCPED does not turn ON in the specified time. MCLUD does not turn ON in the specified time.
Causes: MCPED/MCLUD trouble Multi purpose tray lift-up motor trouble Harness disconnection f the PCU PWB, the lift-up unit, and the paper feed unit.
Remedy: Check MCPED, PCLUD, and their harness and connectors. Check the lift-up unit.

Code: F6-00

Description: Communication trouble (ICU detection) between ICU and FAX
Communication establishment error/Fleming/ Parity/Protocol error
Causes: Slave unit PWB connector disconnection Harness abnormality between slave unit PWB and ICU PWB. Slave unit PWB mother board connector pin breakage Slave unit ROM abnormality/No ROM/ Reverse insertion of ROM/ROM pin breakable
Remedy: Check connector harness between slave unit PWB and ICU PWB. Check grounding of machine. Check slave unit PWB ROM.

Code: F6-01

Description: FAX expansion flash memory abnormality (ICU detection)
Expansion flash memory with SRAM backup data is installed
Causes: SRAM backup data is detected in expansion flash memory. Expansion flash memory in which SRAM data are backed up with SIM 66-19 is installed.
Remedy: Restore backup data to SRAM with SIM 66- 20, and clear expansion flash memory with SIM 66-10. If data are unnecessary, clear expansion flash memory with SIM 66- 10.

Code: F6-04

Description: FAX modem operation abnormality
FAX PWB modem chip operation abnormality
Causes: The boot test pin in the FAX PWB is shorted and normal operation is tried. Modem chip operation abnormality in FAX PWB
Remedy: Turn on the power again without shorting the boot test pin in the FAX PWB. Replace FAX PWB.

Code: F7-01

Description: FAX board EEPROM read/write error
EEPROM access error (read/write)
Causes: EEPROM trouble FAX PWB EEPROM access circuit trouble
Remedy: Replace FAX PWB.

Code: F9-02

Description: PRT Centro port check error
Controller Centro port trouble
Causes: Centro port trouble Controller PWB trouble
Remedy: Replace the Controller PWB.

Code: F9-03

Description: NIC port check error
Causes: NIC port trouble NIC PWB trouble Controller PWB trouble
Remedy: Replace the NIC PWB. Replace the Controller PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie