Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp ARM450U — Trang 6/12

Code: F1-32

Description: Communication trouble between the console finisher (AR-FN7) and the punch unit (AR-PN1).
Communication err between the console finisher and the punch unit.
Causes: Improper connection or disconnection of connector and harness between the console finisher and the punch unit. Console finisher control PWB trouble Control PWB (PCU) trouble Malfunction by noise
Remedy: Canceled by turning OFF/ON the power. Check connectors and harness in the communication line. Replace the console finisher control PWB.

Code: F1-33

Description: Console finisher (AR-FN7) punch (AR-PN1) side registration motor trouble
Punch side registration motor operation abnormality
Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
Remedy: Use DIAG (SIM3-3) to check the motor operation.

Code: F1-34

Description: Console finisher (AR-FN7) punch (AR-PN1) motor trouble
Punch motor operation abnormality
Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
Remedy: Use DIAG (SIM3-3) to check the motor operation.

Code: F1-35

Description: Console finisher (AR-FN7) punch (AR-PN1) side registration sensor trouble
Sensor input value abnormality
Causes: Sensor breakage Harness disconnection Console finisher control PWB trouble
Remedy: Use DIAG (SIM3-2) to check the sensor operation.

Code: F1-36

Description: Console finisher (AR-FN7) punch (AR-PN1) timing sensor trouble
Sensor input value abnormality
Causes: Sensor breakage Harness disconnection Console finisher control PWB trouble
Remedy: Use DIAG (SIM3-2) to check the sensor operation.

Code: F1-37

Description: Console finisher (AR-FN7) backup RAM trouble
Backup RAM contents are disturbed.
Causes: Console finisher control PWB trouble Malfunction by noise
Remedy: Replace the console finisher control PWB.

Code: F1-38

Description: Console finisher (AR-FN7) punch (AR-PN1) backup RAM trouble
Punch unit backup RAM contents are disturbed.
Causes: Punch control PWB trouble Malfunction by noise
Remedy: Replace the punch control PWB.

Code: F1-80

Description: Mail-bin stacker (AR-MS1) power abnormality
The 24V power is not supplied to the Mail-bin stacker PWB.
Causes: Improper connection or disconnection of connector and harness Mail-bin stacker control PWB trouble Power unit (AR-DC1) trouble
Remedy: Use DIAG (SIM3-2) to check the sensor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie