Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp ARM451 — Trang 4/14

Code: EE-EL

Description: Auto developer adjustment trouble (Over-toner)
The toner concentration output is detected as 1.5V or below in the auto development adjustment.
Causes: Toner concentration sensor trouble Charging voltage, developing voltage abnormality Insufficient toner concentration Developing unit trouble PCU PWB trouble
Remedy: Use SIM25-2 to perform auto developer adjustment.

Code: EU

Description: Auto developer adjustment trouble (Under-toner)
The toner concentration output is detected as 3.5V or above in the auto development adjustment.
Causes: Insufficient toner concentration Charging voltage, developing voltage abnormality Insufficient toner concentration Developing unit trouble PCU PWB trouble
Remedy: Use SIM25-2 to perform auto developer adjustment.

Code: F1-00

Description: Finisher communication trouble
Communication cable test error after turning on the power or exiting from SIM. Communication error with the finisher
Causes: Improper connection or disconnection of connectors and harness between the machine and the finisher. Finisher control PWB trouble Control PWB (PCU) trouble Malfunction by noises
Remedy: Canceled by turning OFF/ON the power. Check connectors and harness in the communication line. Replace the finisher control PWB or PCU PWB.

Code: F1-00

Description: Mail-bin stacker communication trouble
Communication cable test error after turning on the power or exiting from SIM. Communication error with the Mail-bin stacker.
Causes: Improper connection or disconnection of connector and harness between the machine and the Mail-bin stacker. Mail-bin stacker control PWB trouble Control PWB (PCU) trouble Malfunction by noises
Remedy: Canceled by turning OFF/ON the power. Check harness and connector in the communication line. Replace the Mail-bin stacker PWB or PCU PWB.

Code: F1-02

Description: Finisher transport motor abnormality
Transport motor drive trouble
Causes: Motor lock Drive abnormality Defective connection or disconnection between the PWB and the motor. Motor RPM abnormality Overcurrent to the motor Finisher control PWB trouble
Remedy: Use SIM 3-3 to check the transport motor operation.

Code: F1-02

Description: Mail-bin stacker transport motor abnormality
Transport motor trouble
Causes: Motor lock Drive abnormality Defective connection or disconnection between the PWB and the motor. Motor rpm abnormality Overcurrent to the motor Mail-bin stacker control PWB trouble
Remedy: Use SIM3-21 to check the transport motor operation.

Code: F1-03

Description: Console finisher paddle motor trouble
Paddle motor operation abnormality
Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
Remedy: Use SIM3-3 to check the motor operation.

Code: F1-06

Description: Console finisher slide motor trouble
Slide motor operation abnormality
Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
Remedy: Use SIM3-3 to check the motor operation.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie