• Code: F1-19
• Description: Finisher front alignment motor trouble
  Front alignment motor operation abnormality
• Causes: Motor lock Drive abnormality Defective connection or disconnection between the PWB and the motor. Home position sensor abnormality Motor rpm abnormality Finisher control PWB trouble
• Remedy: Use SIM3-3 to check the motor operation.

• Code: F1-19
• Description: Console finisher front alignment motor trouble
  Front alignment motor operation abnormality
• Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
• Remedy: Use SIM3-3 to check the motor operation.

• Code: F1-20
• Description: Finisher rear alignment motor trouble
  Rear alignment motor operation abnormality
• Causes: Motor lock Drive abnormality Defective connection or disconnection between the PWB and the motor. Home position sensor abnormality Motor rpm abnormality Finisher control PWB trouble
• Remedy: Use SIM3-3 to check the motor operation.

• Code: F1-20
• Description: Console finisher rear alignment motor trouble
  Rear alignment motor operation abnormality
• Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
• Remedy: Use SIM3-3 to check the motor operation.

• Code: F1-30
• Description: Console finisher communication trouble
  Communication cable test error after turning on the power or exiting from SIM. Communication error with the console finisher
• Causes: Improper connection or disconnection of connector and harness between the machine and the console finisher. Console finisher control PWB trouble Control PWB (PCU) trouble Malfunction by noises
• Remedy: Canceled by turning OFF/ON the power. Check connectors and harness in the communication line. Replace the console finisher control PWB or PCU PWB.

• Code: F1-31
• Description: Console finisher fold sensor trouble
  Sensor input value abnormality
• Causes: Sensor breakage harness breakage Console finisher control PWB trouble
• Remedy: Use SIM3-2 to check the sensor operation.

• Code: F1-32
• Description: Communication trouble between the console finisher and the punch unit.
• Causes: Improper connection or disconnection of connector and harness between the console finisher and the punch unit. Console finisher control PWB trouble Control PWB (PCU) trouble Malfunction by noise
• Remedy: Canceled by turning OFF/ON the power. Check connectors and harness in the communication line. Replace the console finisher control PWB.

• Code: F1-33
• Description: Console finisher punch side registration motor trouble
  Punch side registration motor operation abnormality
• Causes: Motor lock Motor rpm abnormality Overcurrent to the motor Console finisher control PWB trouble
• Remedy: Use SIM3-3 to check the motor operation.