Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp ARN182G — Trang 2/8

Code: CE-12

Description: LDAP number over
The number of LDAP exceeds the specification.
Causes:
Remedy: The number of destinations which are the targets of the global address search exceeds the max. number. Use a longer set of characters for search to narrow the area of search.

Code: CE-18

Description: RTC battery error
The battery for RTC is low.
Causes:
Remedy: Replace the battery for RTC.

Code: CH-Blink

Description: Developing cartridge not installed
The developing cartridge is not installed. Communication with the CRUM cannot be made in initial check of the CRUM.
Causes: Developing unit disconnection MCU PWB abnormality CRUM chip abnormality
Remedy: Check installation of the developing unit. Replace the MCU PWB.

Code: CH-ON

Description: Side door open
The side door is open.
Causes: Side door sensor abnormality MCU PWB abnormality
Remedy: Check that all the side doors are closed. Replace the MCU PWB.

Code: E7-01

Description: Duplex model memory error/ Image data error
1. The memory capacity for the duplex model machine is wrong. Insufficient memory capacity. 2. Duplex setting is set for a single surface model.
Causes: 1. The memory capacity on the MCU PWB is wrong. 2. Setting for a single surface model is wrong.
Remedy: 1. Use SIM26-39 to check to confirm that the memory capacity is 128MB. If it is not 128MB, replace the MCU PWB. 2. If SIM26-04 is set to 1, change the setting to 0. If it is 0, replace the MCU PWB.

Code: E7-02

Description: LSU trouble
The BD signal from the LSU cannot be detected in a certain cycle. (Always OFF or always ON)
Causes: LSU connector or LSU harness defect or disconnection Polygon motor rotation abnormality Laser beams are not generated. MCU PWB abnormality.
Remedy: Check connection of the LSU connector. Execute SIM 61-03 to check the LSU operations. Check that the polygon motor rotates normally. Replace the LSU unit. Replace the MCU PWB.

Code: E7-06

Description: Image data decode error
Causes: MCU PWB abnormality USB cable trouble
Remedy: Replace the MCU PWB. Replace the USB cable.

Code: E7-10

Description: Shading trouble (Black correction)
The CCD black scan level is abnormal when the shading.
Causes: Improper connection of the CCD unit flat cable CCD unit abnormality MCU PWB abnormality.
Remedy: Check connection of the CCD unit flat cable. Check the CCD unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie