Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MX2300N — Trang 5/20

Code: E7-55

Description: PWB information sum error (Engine detection)
EEPROM PWB information sum error
Causes: 1) EEPROM device error 2) EEPROM device contact failure 3) Device access error due to noises
Remedy: Replace the PCU PWB.

Code: E7-60

Description: Controller connection trouble (Engine detection)
Unknown PWB kind information is detected in the MFPcnt PWB. A PWB/firmware which is not compatible with the machine specifications is connected.
Causes: Controller PWB trouble A firmware which is not compatible with the machine specifications is applied.
Remedy: Case 1 Cause Controller PWB trouble Check and remedy Replace the controller PWB. Case 2 Cause A firmware which is not compatible with the machine specifications is applied. Check and remedy Check the kind and the version of the firmware.

Code: E7-61

Description: Controller connection trouble (Engine)
MFPcnt PWB connection trouble Compatibility trouble between the controller and the engine
Causes: Combination trouble of the controller PWB and the engine
Remedy: Check the controller PWB. Check the combination between the controller PWB and the engine.

Code: E7-62

Description: Controller connection trouble (Scanner)
Controller connection trouble Compatibility trouble between the controller and the scanners
Causes: Combination trouble between the controller PWB and the engine
Remedy: Replace the controller PWB. Check the combination between the controller PWB and the engine.

Code: E7-65

Description: PWB information sum error (Controller detection)
EEPROM PWB information sum error
Causes: 1) EEPROM device trouble 2) EEPROM device contact failure 3) Device access error due to noises
Remedy: Replace the MFPcnt PWB.

Code: E7-70

Description: Scanner connection trouble
Unknown identification information is detected in the SCU PWB.
Causes: SCU PWB trouble A firmware which is incompatible with the machine
specifications is connected.
Remedy: Case 1 Cause SCU PWB trouble Check and remedy Replace the SCU PWB. Case 2 Cause A firmware which is incompatible with the machine specifications is connected. Check and remedy Check the kind and the version of the firmware.

Code: E7-75

Description: PWB information sum error (Scanner detection)
EEPROM PWB information sum error
Causes: 1) EEPROM device trouble 2) EEPROM device contact failure 3) Device access error due to noises
Remedy: Replace the scanner control PWB.

Code: E7-80

Description: Communication trouble between the controller and the scanner
Communication trouble between the MFP and the scanner MFP detection Communication establishment error/Framing/Parity/ Protocol error
Causes: SCU PWB connector connection trouble Harness trouble between the SCU PWB and the MFPcnt PWB Broken connector pin of the SCU PWB mother board
Remedy: Case 1 Cause SCU PWB connector connection trouble Check and remedy Check the connector connection between the SCU PWB and the MFPcnt PWB. Case 2 Cause Harness trouble between the SCU PWB and the MFPcnt PWB Check and remedy Check the harness between the SCU PWB and the MFPcnt PWB. Case 3 Cause Broken connector pin of the SCU PWB mother board Check and remedy Check grounding of the machine.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie