Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MX2700G — Trang 19/20

Code: U6-00

Description: Desk communication trouble
Desk communication error, communication line test error after turning on the power or canceling the exclusive simulation
Causes: Connector and harness connection trouble or disconnection, desk control PWB trouble, control PWB (PCU) trouble, malfunction due to electrical noises
Remedy: Cancel the trouble by turning OFF/ON. Check the connector and the harness of the communication line.

Code: U6-01

Description: Tray 1 lift-up trouble
DLUD1 does not turn ON within the specified time.
Causes: DLUD1 sensor trouble, tray 1 lift-up motor trouble, desk PWB, lift-up unit, paper feed unit harness connection trouble
Remedy: Check DLUD1 and its harness and connector. Check the lift-up unit.

Code: U6-02

Description: Tray 2 lift-up trouble
DLUD2 does not turn ON within the specified time.
Causes: DLUD2 sensor trouble, tray 2 lift-up motor trouble, desk PWB, lift-up unit, paper feed unit harness connection trouble
Remedy: Check DLUD2 and its harness and connector. Check the lift-up unit.

Code: U6-09

Description: LCC lift motor trouble
• The encoder input value is not changed in 0.13sec (1st time)/0.5sec (2nd time and later) after rotation of the motor. • The motor is rotated for 18sec or more. • The encoder is changed after passing a certain time from stopping the motor. (2sec, 10 count or more)
Causes: Sensor trouble, LCC control PWB trouble, gear breakage, lift motor trouble
Remedy: Use SIM4-2 and 4-3 to check the operation of the sensor and the lift motor. Use SIM15 to cancel the trouble.

Code: U6-10

Description: Desk transport motor trouble
Desk transport motor operation trouble
Causes: Motor lock, motor RPM abnormality, overcurent to the motor, console finisher control PWB trouble
Remedy: Use SIM 4-3 to check the operation of the desk transport motor.

Code: U6-20

Description: LCC communication trouble
LCC communication error. Communication line test error after turning ON the power or canceling the exclusive simulation. LCC and machine model codes discrepancy error
Causes: Connector and harness connection trouble or disconnection, LCC control PWB trouble, control PWB (PCU) trouble, malfunction due to electrical noises
Remedy: Turn OFF/ON the power to cancel the trouble. Check the connector and the harness of the communication line.

Code: U6-21

Description: LCC transport motor trouble
• The encoder input value is not changed in 0.06sec after turning on the motor. • The encoder input value is changed after a certain time from turning OFF the motor. (After 5sec, count is made for 0.1sec to get 100 or more count.)
Causes: Motor lock, motor RPM abnormality, an overcurrent to the motor, LCC control PWB trouble
Remedy: Use SIM4-3 to check the operation of the transport motor.

Code: U6-22

Description: LCC 24V power abnormality
DC24V power is not supplied to LCC.
Causes: Connector and harness connection trouble or disconnection, LCC control PWB trouble, power unit trouble
Remedy: Check the connector and the harness of the power line. Check that the power unit and the LCC control PWB is of 24V.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie