Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MX3100G — Trang 12/20

Code: F2-78

Description: Registration image density sensor trouble (Transfer belt substrate reflection rate abnormality)
Causes: Image density (registration) sensor trouble (Sensor sensitivity adjustment trouble). PCU PWB trouble. Connection trouble of the connector and the harness. Image density (registration) sensor dirt. Transfer belt dirt, scratch.
Remedy: Replace the image density (registration) sensor. Replace the PCU PWB. Harness and connector connection trouble. Clean the image density (registration) sensor. Clean or replace the transfer belt.

Code: F3-12

Description: Paper feed tray 1 lift operation trouble
Causes: LUD1 is not turned ON within the specified time. CLUD1 sensor trouble Paper feed tray 1 lift unit trouble. PCU PWB trouble. Harness and connector connection trouble.
Remedy: Check connection of the harness and the connector of LUD1. Replace the lift-up unit. Replace the PCU PWB.

Code: F3-22

Description: Paper feed tray 2 lift operation trouble
LUD2 does not turn ON within the specified time
Causes: LUD2 does not turn ON within the specified time. CLUD2 sensor trouble. Paper feed tray 2 lift unit trouble. PCU PWB trouble. Harness and connector connection trouble.
Remedy: Check the harness and the connector of LUD2. Replace the lift-up unit. Replace the PCU PWB.

Code: H2-00

Description: Thermister open trouble (TH_UM_AD2)
Causes: Thermister trouble. PCU PWB trouble Connection trouble of the connector and the harness. Fusing unit not installed.
Remedy: Replace the thermister. Replace the PCU PWB. Harness and connector connection trouble.

Code: H2-01

Description: Thermister open trouble (TH_LM)
Causes: Thermister trouble. PCU PWB trouble. Connection trouble of the connector and the harness. Fusing unit not installed.
Remedy: Replace the thermister. Replace the PCU PWB. Harness and connector connection trouble.

Code: H2-02

Description: Sub thermister open trouble (TH_US)
Causes: Thermister trouble. PCU PWB trouble. Connection trouble of the connector and the harness. Fusing unit not installed.
Remedy: Replace the thermister. Replace the PCU PWB. Harness and connector connection trouble.

Code: H2-03

Description: Compensation thermister open trouble (TH_UM_AD1)
Causes: Thermister trouble. PCU PWB trouble Connection trouble of the connector and the harness. Fusing unit not installed.
Remedy: Replace the thermister. Replace the PCU PWB. Harness and connector connection trouble.

Code: H3-00

Description: Fusing section high temperature trouble (TH_UM)
Causes: The fusing temperature exceeds the specified level. Thermister trouble. PCU PWB trouble Connection trouble of the connector and the harness. Power unit trouble.
Remedy: Use SIM5-2 to check the flashing operation of the heater lamp. Use SIM14 to cancel the trouble. Replace the thermister. Replace the PCU PWB. Harness and connector connection trouble. Replace the power unit.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie