Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MX3500FN — Trang 19/20

Code: U5-30

Description: SPF lift-up trouble
Lift-up trouble is detected 5 times continuously. (MX-3501N/4501N)
Causes: STUD/STLD trouble
Remedy: Check STUD/STLD and its harness and connector. Check the lift-up unit.

Code: U5-31

Description: SPF tray lift-down trouble
Lift-down trouble (STLD does not turn OFF within the specified time.) (MX-3501N/4501N)
Causes: STUD/STLD trouble
Remedy: Check STUD/STLD and its harness and connector. Check the lift-up unit.

Code: U5-40

Description: SPF install trouble
Detected the installed (individual installed signal ) of RSPF/DSPF both.
Causes: Circuit trouble of the installed detection signal
Remedy: Check installed detection circuit and harness, connector.

Code: U6-00

Description: Desk communication trouble
Desk communication error, communication line test error after turning on the power or canceling the exclusive simulation
Causes: Connector and harness connection trouble or disconnection, desk control PWB trouble, control PWB (PCU) trouble, malfunction due to electrical noises
Remedy: Cancel the trouble by turning OFF/ON. Check the connector and the harness of the communication line.

Code: U6-01

Description: Tray 1 lift-up trouble
DLUD1 does not turn ON within the specified time.
Causes: DLUD1 sensor trouble, tray 1 lift-up motor trouble, desk PWB, lift-up unit, paper feed unit harness connection trouble
Remedy: Check DLUD1 and its harness and connector. Check the lift-up unit.

Code: U6-02

Description: Tray 2 lift-up trouble
DLUD2 does not turn ON within the specified time
Causes: DLUD2 sensor trouble, tray 2 lift-up motor trouble, desk PWB, lift-up unit, paper feed unit harness connection trouble
Remedy: Check DLUD2 and its harness and connector. Check the lift-up unit.

Code: U6-09

Description: LCC lift motor trouble
• The encoder input value is not changed in 0.13sec (1st time)/0.5sec (2nd time and later) after rotation of the motor. • The motor is rotated for 18sec or more. • The encoder is changed after passing a certain time from stopping the motor. (2sec, 10 count or more)
Causes: Sensor trouble, LCC control PWB trouble, gear breakage, lift motor trouble
Remedy: Use SIM4-2 and 4-3 to check the operation of the sensor and the lift motor. Use SIM15 to cancel the trouble.

Code: U6-10

Description: Desk transport motor trouble
Desk transport motor operation trouble
Causes: Motor lock, motor RPM abnormality, overcurent to the motor, console finisher control PWB trouble
Remedy: Use SIM 4-3 to check the operation of the desk transport motor.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie