Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MX4060N — Trang 21/32

Code: F6-02

Description: FAX power supply trouble
Causes: DC power supply trouble at the main machine. SCN-MFP PWB trouble (Fuse break trouble). 24 volt detection circuit Trouble at FAX PWB. Harness trouble between the FAN PWB and SCNMFP PWB.
Remedy: Check the 24 volt supply circuit between the machine and the FAX PWB. Replace the DC power supply unit at the machine. Replace the SCN-MFP PWB. Replace the FAX PWB. REplace the harness between the machine and the FAX PWB.

Code: F6-04

Description: FAX MODEM operation trouble
Causes: FAX
Remedy: Case 1 Cause FAX MODEM chip operation trouble. Check and remedy Replace the FAX control PWB. Case 2 Cause The FAX MODEM chip cannot be accessed. Check and Remedy Replace the FAX control PWB.

Code: F6-21

Description: Improper combination of TEL/LIU PWB and FAX soft switch
Causes: FAX
Remedy: Case 1 Cause The destination of the TEL/LIU PWB installed is improper. Check and Remedy Check the destination of the TEL/LIU PWB. Case 2 Cause TEL/LIU PWB trouble. Check and Remedy Replace the TEL/LIU PWB. Case 3 Cause Different Fax PWB information (Soft Switch) Check and Remedy Check Fax PWB information (Soft Switch)

Code: F6-30

Description: FAX 1-chip microprocessor access error (FAX detection)
Causes: FAX
Remedy: Case 1 Cause Program writing trouble to the 1-chip microprocessor, or no program data written. Check and Remedy Use SIM66-42 to rewrite the 1-chip microprocessor program. Case 2 Cause FAX 1-chip microprocessor circuit trouble. Check and Remedy Replace the FAX PWB and Use SIM66-42 to rewrite the program.

Code: F6-97

Description: Incompatibility between FAX PWB and the main machine
Causes: FAX
Remedy: Case 1 Cause The FAX PWB installed is improper. FAX PWB trouble. Check and Remedy Install a proper FAX PWB. Replace the FAX PWB.

Code: F6-98

Description: Incompatibility between the FAX PWB destination and the main machine destination
Causes: Incompatibility between the destination information written into the FAX PWB PCI and that in the main machine (set with SIM26-6)
Remedy: Check the destination of the FAX control PWB. Check the destination of the main machine (SIM26- 06)

Code: H2-00

Description: Thermistor open trouble (Upper main TH_UM detection) (TH_LM)
Causes: Thermistor trouble PCU PWB trouble Thermistor connector and harness trouble AC Power unit trouble
Remedy: Use SIM44-14 to check the state of the thermistor. Replace the thermistor. Replace the PCU PWB. Check connection of the thermistor connector and the harness. Check the connector in the fusing section.

Code: H2-01

Description: Thermistor open trouble (Lower main TH_LM) (TH_LM)
Causes: Thermistor trouble PCU PWB trouble Thermistor connector and harness trouble AC Power unit trouble
Remedy: Use SIM44-14 to check the state of the thermistor. Replace the thermistor. Replace the PCU PWB. Check connection of the thermistor connector and the harness. Check the connector in the fusing section.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie