Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MX4501N — Trang 20/20

Code: U6-20

Description: LCC communication trouble
LCC communication error. Communication line test error after turning ON the power or canceling the exclusive simulation. LCC and machine model codes discrepancy error
Causes: Connector and harness connection trouble or disconnection, LCC control PWB trouble, control PWB (PCU) trouble, malfunction due to electrical noises
Remedy: Turn OFF/ON the power to cancel the trouble. Check the connector and the harness of the communication line.

Code: U6-21

Description: LCC transport motor trouble
• The encoder input value is not changed in 0.06sec after turning on the motor. • The encoder input value is changed after a certain time from turning OFF the motor. (After 5sec, count is made for 0.1sec to get 100 or more count.)
Causes: Motor lock, motor RPM abnormality, an overcurrent to the motor, LCC control PWB trouble
Remedy: Use SIM4-3 to check the operation of the transport motor.

Code: U6-22

Description: LCC 24V power abnormality
DC24V power is not supplied to LCC.
Causes: Connector and harness connection trouble or disconnection, LCC control PWB trouble, power unit trouble
Remedy: Check the connector and the harness of the power line. Check that the power unit and the LCC control PWB is of 24V.

Code: U6-50

Description: Desk incompatibility trouble
Detection of desk connection incompatible with the MX-3500/4500/3501/4501 **
Causes: Connection of a desk which is incompatible with the MX-3500/4500/3501/4501** is detected.
Remedy: Connect the MX-DEX3/DEX4.

Code: U6-51

Description: LCC incompatibility trouble
Detection of LCC connection which is incompatible with the MX-3500/4500/3501/4501 **.
Causes: Connection of the LCC, which is incompatible with the MX-3500/ 4500/ 3501/ 4501 ** is detected.
Remedy: Connect the MX-LCX1.

Code: UC-02

Description: CPT-ASIC abnormality
CPT-ASIC access error (When the ASIC does not operate normally.)
Causes: CPT-ASIC abnormality, SCU PWB abnormality
Remedy: Turn OFF/ON the power several times. If the trouble still occurs, replace the SCU PWB or the CPT-ASIC.

Code: UC-20

Description: Document control module trouble
Communication error between SCU and DOCC Communication line test error when turning on the power or after canceling an exclusion simulation.
Causes: Connector or harness connection error or disconnection Control PWB (SCU) trouble, DOCC PWB trouble. Malfunction due to electrical noises.
Remedy: Case 1 Cause Connector or harness connection error or disconnection Check and remedy Check the connector and harness in the communication line. Case 2 Cause Control PWB (SCU) trouble, DOCC PWB trouble. Check and remedy Replace the SCU PWB or the DOCC PWB. Case 3 Cause Malfunction due to electrical noises. Check and remedy Turn OFF/ON the power to electrical cancel the trouble.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie