Description: Finisher communication trouble (Machine side detection)
Causes: Communication line test error when turning on the power or after canceling an exclusion simulation. Communication error with the finisher
Remedy: Case 1 Cause Malfunction due to electrical noises Check and remedy Turn OFF/ON the power to cancel. Case 2 Cause PCU finisher connector or harness connection error or disconnection Check and remedy Check the connector and harness in the communication line. Case 3 Cause Finisher control PWB trouble Check and remedy Replace the finisher control PWB. Case 4 Cause Control (PCU) PWB trouble Check and remedy Replace the PCU PWB.
Remedy: Case 1 Cause Motor lock, motor RPM abnormality, motor overvoltage, finisher control PWB trouble Check and remedy Use SIM3-3 to check the operation of the tray lift motor (FTLM). Replace the finisher control PWB. Case 2 Cause Interlock switch (black bar-shape switch under the upper tray) operation Check and remedy Check that there is nothing on the interlock switch. If there is, remove it.