Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MX7001N — Trang 7/26

Code: EE-EL

Description: Auto developer adjustment trouble (Overtoner abnormality)
Causes: Toner density sensor trouble, charging voltage/ developing voltage trouble, toner density trouble, developing unit trouble, PCU PWB trouble
Remedy: Use SIM25-2 to execute the auto developer adjustment.

Code: EE-EU

Description: Auto developer adjustment trouble (Under-toner abnormality)
Causes: Toner density sensor trouble, charging voltage/ developing voltage trouble, toner density trouble, developing unit trouble, PCU PWB trouble
Remedy: Use SIM25-2 to execute the auto developer adjustment.

Code: F1-00

Description: Finisher communication trouble (Machine side detection)
Causes: Communication line test error when turning on the power or after canceling an exclusion simulation. Communication error with the finisher
Remedy: Case 1 Cause Malfunction due to electrical noises Check and remedy Turn OFF/ON the power to cancel. Case 2 Cause PCU finisher connector or harness connection error or disconnection Check and remedy Check the connector and harness in the communication line. Case 3 Cause Finisher control PWB trouble Check and remedy Replace the finisher control PWB. Case 4 Cause Control (PCU) PWB trouble Check and remedy Replace the PCU PWB.

Code: F1-03

Description: Finisher oscillation motor trouble
Causes: Motor lock, motor RPM abnormality, motor overvoltage, finisher control PWB trouble
Remedy: Use SIM3-3 to check the operation of the motor (FSWM). Replace the finisher control PWB.

Code: F1-08

Description: Finisher stapler shift motor trouble
Causes: Motor lock, motor RPM abnormality, motor overvoltage, finisher control PWB trouble
Remedy: Use SIM3-3 to check the operation of the staple motor (FSM). Replace the finisher control PWB.

Code: F1-10

Description: Finisher staple motor abnormality
Causes: Motor lock, motor RPM abnormality, motor overvoltage, finisher control PWB trouble
Remedy: Use SIM3-3 to check the operation of the staple motor (FFSM). Replace the finisher control PWB.

Code: F1-15

Description: Finisher tray lift motor abnormality
Causes: Lift motor trouble
Remedy: Case 1 Cause Motor lock, motor RPM abnormality, motor overvoltage, finisher control PWB trouble Check and remedy Use SIM3-3 to check the operation of the tray lift motor (FTLM). Replace the finisher control PWB. Case 2 Cause Interlock switch (black bar-shape switch under the upper tray) operation Check and remedy Check that there is nothing on the interlock switch. If there is, remove it.

Code: F1-19

Description: Finisher pre-alignment motor abnormality
Causes: Motor lock, motor RPM abnormality, motor overvoltage, finisher control PWB trouble
Remedy: Use SIM3-3 to check the operation of the prealignment motor (FFJM). Replace the finisher control PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie