• Code: F1-45
• Description: Saddle staple trouble (FSFSTM) Abnormality of the staple unit drive motor in the saddle section.
• Causes: Saddle staple motor trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
• Remedy: Use SIM3-3 to check the operation of the saddle staple motor. Check connection from the control PWB to the motor. Turn OFF/ON the power. Replace the control PWB. Replace the sensor.

• Code: F1-46
• Description: Saddle pushing plate motor trouble (FSLGM)
• Causes: Saddle motor trouble. Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
• Remedy: Use SIM3-3 to check the operation of the saddle motor. Check connection from the control PWB to the motor. Turn OFF/ON the power. Replace the control PWB. Replace the sensor.

• Code: F1-50
• Description: Main unit - Finisher combination error
• Causes: The finisher which is not supported by the main unit model is installed. Finisher control PWB trouble.
• Remedy: Install a proper finisher. Replace the finisher control PWB.

• Code: F1-51
• Description: Saddle sensor connection trouble (FSGHPD, FSLGHPD or FSLGTD)
• Causes: Finisher control PWB trouble. Home position sensor trouble. Harness and connector connection trouble.
• Remedy: Use SIM03-02 to check the operations of the guide HP sensor and the push plate lead edge sensor. Check connection from the control PWB to the sensor. Replace the control PWB. Replace the sensor.

• Code: F1-52
• Description: Finisher inlet door switch trouble (FSINDSW)
• Causes: Finisher control PWB trouble. Each micro switch trouble. Harness and connector connection trouble.
• Remedy: Use SIM03-02 to check the operations of the front door/upper door open detection and the oscillation guide close detection. Check connection from the control PWB to the sensor. Replace the control PWB. Replace the sensor.

• Code: F1-60
• Description: Communication error between the Finisher and Inserter Communication abnormality between the units connected to the downstream of the inserter. No response for a command from the inserter. Motor abnormality.
• Causes: Noise on the communication line Control PWB trouble. Harness and connector connection trouble.
• Remedy: Turn OFF/ON the power. Check connection of the connector with the downstream units of the inserter. Replace the control PWB of the downstream units of the inserter.

• Code: F1-64
• Description: No. 1 pickup motor trouble Abnormality of the paper feed roller driving motor in the upper side paper feed section of the inserter
• Causes: Motor lock, control PWB trouble, home position sensor breakdown, connection harness / connector connection trouble.
• Remedy: Use Sim. 3-31 to check the operation of the No. 1 pickup motor. Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.

• Code: F1-65
• Description: No. 2 pickup motor trouble. Abnormality of the paper feed roller driving motor in the lower side paper feed section of the inserter
• Causes: Motor lock, control PWB trouble, home position sensor breakdown, connection harness / connector connection trouble.
• Remedy: Use Sim. 3-31 to check the operation of the No. 2 pickup motor. Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.