Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MX7580N — Trang 26/41

Code: F6-21

Description: Improper combination of TEL/LIU PWB and FAX soft switch.
Causes: Incompatibility between the TEL/LIU PWB and the FAX control PWB information (soft switch)
Remedy: Case 1 Cause The destination of the TEL/LIU PWB installed is improper. Check and Remedy Check the destination of the TEL/LIU PWB. Case 2 Cause TEL/LIU PWB trouble. Check and Remedy Replace the TEL/LIU PWB.

Code: F6-30

Description: FAX 1-chip microprocessor access error (FAX detection)
Causes: FAX 1-chip microprocessor access error (Read and write)
Remedy: Case 1 Cause Program writing trouble to the 1-chip microprocessor, or no program data written. Check and Remedy Use SIM66-42 to rewrite the 1-chip microprocessor program. Case 2 Cause FAX 1-chip microprocessor circuit trouble. Check and Remedy Replace the FAX control PWB.

Code: F6-97

Description: Incompatibility between FAX control PWB and the main machine. Incompatibility between FAX control PWB and the main machine
Causes: The FAX control PWB installed is improper. FAX control PWB trouble.
Remedy: Install a proper FAX control PWB. Replace the FAX control PWB.

Code: F6-98

Description: Incompatibility between the FAX control PWB destination and the main machine destination. Incompatibility between the FAX control PWB destination and the main machine destination
Causes: Incompatibility between the destination information written into the FAX control PWB EEPROM and that in the main machine (set with SIM26-6)
Remedy: 1) Check the destination of the FAX control PWB. 2) Check the destination of the machine. (SIM26-6)

Code: F9-00

Description: Communication error between MFP and the printer section when booting.Booting of the printer section cannot be recognized when booting.
Causes: MFPC (section) PWB trouble. CF card trouble. MFPC (section) PWB - printer (section) PWB connection trouble.
Remedy: Replace the MFPC (section) PWB. Replace the CF card. Check connection between the MFPC (section) PWB and the printer (section) PWB.

Code: H2-00

Description: Thermistor open trouble (TH_UM_AD2)
Causes: Thermistor trouble PCU PWB trouble Thermistor connector and harness connection trouble Fusing section connector connection trouble Fusing unit not installed
Remedy: Use SIM44-14 to check the state of the thermistor. Replace the thermistor. Replace the PCU PWB. Check connection of the thermistor connector and the harness. Check the connector in the fusing section.

Code: H2-01

Description: Non-contact thermistor lower main detection thermistor open (TH_LM1_AD2)
Causes: Thermistor trouble Control PWB trouble Fusing section connector connection trouble AC power trouble Fusing unit not installed.
Remedy: Check connection of the harness and the connector from the thermistor to the control PWB.

Code: H2-02

Description: Non-contact thermistor upper sub detection thermistor open (TH_US1_AD2)
Causes: Thermistor trouble Control PWB trouble Fusing section connector connection trouble AC power trouble Fusing unit not installed.
Remedy: Check connection of the harness and the connector from the thermistor to the control PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie