Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM1100 — Trang 17/30

Code: F6-30

Description: Access error to the power controller on the FAX PWB. (FAX detection). Access error to the power controller (read /write)
Causes: Power controller trouble. FAX PWB power controller access circuit trouble. Power controller program write error. (Or, the power controller program is not written.)
Remedy: Use Sim. 66-42 to rewrite the power controller program. Replace the chip. When replaced, rewrite of the power controller program with Sim. 66-42 is required. Replace the FAX PWB.

Code: F6-97

Description: FAX PWB skating trouble. The FAX PWB model identification does not match the machine model.
Causes: The FAX PWB model does not match the machine model.
Remedy: Replace the FAX PWB with one whose model matches the machine model.

Code: F6-98

Description: Combination error between the FAX PWB destination information and the machine destination information
Causes: The destination information written in the EEPROM on the FAX PWB does not match the destination information of the machine (set with Sim. 26 - 6).
Remedy: Check the FAX PWB destination. Check themachine destination setting. (SIM26-6 ) Use the proper combination between the machine and the FAX PWB.

Code: F9-00

Description: Communication trouble between the controller and the printer controller (FIERY).
Causes: Printer controller ICU PWB cable trouble. Printer controller trouble. ICU PWB trouble.
Remedy: Check connection of the printer controller cable. Repair or replace the printer controller. After checking, turn OFF /ON the power of the machine and the printer controller.

Code: FF-00

Description: Double feed detection trouble (PCU)
Causes: Double feed sensor abnormality. Harness / circuit trouble related to the double feed sensor. Insertion failure of the drawer connector of the PS unit.
Remedy: Check the circuit related to the double feed sensor and the harness and the connector. Replace the double feed detection PWB and the sensor.

Code: FF-10

Description: Double feed detection trouble (SCU)
Causes: Double feed sensor abnormality. Harness/circuit trouble related to the double feed sensor.
Remedy: Check the circuit related to the double feed sensor and the harness and the connector. Replace the double feed detection PWB and the sensor.

Code: H2-00

Description: Non-contact main thermistor (detection) open (RTH1-d_D)
Causes: Thermistor trouble, control PWB trouble. Fusing section connector trouble. AC power source trouble. The fusing unit is not installed.
Remedy: Check connection of the harness and the connector from the thermistor to the control PWB.

Code: H2-01

Description: Sub thermistor open (RTH2)
Causes: Thermistor trouble, control PWB trouble Fusing section connector trouble AC power source trouble The fusing unit is not installed.
Remedy: Check connection of the harness and the connector from the thermistor to the control PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie