Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM1100 — Trang 6/30

Code: E7-63

Description: Controller connection trouble (Operation). Compatible trouble between the controller and the operation.
Causes: Combination error between the controller PWB and the operation.
Remedy: Check the controller PWB. Check combination between the controller PWB and the operation.

Code: E7-65

Description: PWB information sum error (controller detection). EEPROM PWB information sum error
Causes: EEPROM device trouble. EEPROM device contact trouble. Device access error due to noises.
Remedy: Replace the PWB.

Code: E7-70

Description: Scanner connection trouble. Unknown PWB identification information is detected on the SCU PWB
Causes: The PWB / firmware which is not supported by the machine specifications is connected.
Remedy: Check the firmware kind and the version. Check the SCU PWB.

Code: E7-71

Description: DSPF connection trouble. An unknown PWB identification information is detected in the DSPF PWB/ combination abnormality with the SCU PWB
Causes: PWB / firmware which does not support the machine specifications is connected.
Remedy: Firmware kind / Version check. DSPF PWB trouble.

Code: E7-75

Description: PWB information sum error (scanner detection). EEPROM PWB information sum error
Causes: EEPROM device trouble. EEPROM device contact trouble. Device access error due to noises.
Remedy: Replace the SCU PWB.

Code: E7-80

Description: Communication trouble between the ICU and the scanner (ICU detection). Communication establishment error, framing error, parity error, protocol error
Causes: Slave unit PWB connector connection trouble. Slave unit PWB and ICU PWB harness trouble. Slave unit PWB mother board connector pin breakage.
Remedy: Check connection of the connector and the harness between the slave unit PWB and the ICU PWB. Check grounding of the machine.

Code: E7-90

Description: Communication trouble between the ICU and the PCU. (ICU detection). Communication establishment error, framing error, parity error, protocol error
Causes: Slave unit PWB connector connection trouble. Slave unit PWB and ICU PWB harness trouble. Slave unit PWB mother board connector pin breakage.
Remedy: Check connection of the connector and the harness between the slave unit PWB and the ICU PWB. Check grounding of the machine.

Code: EE-EL

Description: Auto development adjustment trouble (Overtone abnormality) <Detected only when Sim. 25-2, no trouble memory, only display>. The sample level is 76 or less or the control voltage is 208 or above
Causes: Toner density sensor trouble, charging voltage / developing voltage trouble, toner density trouble, developing unit trouble, PCU PWB trouble.
Remedy: Execute the auto development adjustment with Sim. 25-2.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie