Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM1100 — Trang 12/30

Code: F1-65

Description: No. 2 pickup motor trouble. The paper feed roller drive motor abnormality in the inserter lower side paper feed section
Causes: Motor lock, control PWB trouble, home position sensor breakdown, connection harness / connector connection trouble.
Remedy: Use Sim. 3-31 to check the operation of the No. 2 pickup motor. Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.

Code: F1-66

Description: No. 1 lift motor trouble (finisher + saddle unit + inserter) Lift motor 1 trouble (booklet maker). The tray lift-up drive motor abnormality in the inserter upper side paper feed section
Causes: Motor lock, control PWB trouble, home position sensor breakdown, connection harness/connector connection trouble.
Remedy: Use Sim. 3-31 to check the operation of the No. 1 lift motor. Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.

Code: F1-67

Description: No. 2 lift motor trouble (finisher + saddle unit + inserter) Lift motor 2 trouble (booklet maker). The tray lift-up drive motor abnormality in the inserter lower side paper feed section
Causes: Motor lock, control PWB trouble, home position sensor breakdown, connection harness/connector connection trouble.
Remedy: Use Sim. 3-31 to check the operation of the No. 2 lift motor. Check connection from the control PWB to the motor. Replace the control PWB and the sensor part.

Code: F1-70

Description: Communication trouble between peripheral devices (Z-folding machine detection). Communication abnormality between the units connected to the lower stream of the Z-folding unit / No response is made to a command send from the Z-folding unit
Causes: Communication line noises, control PWB trouble, connection trouble, connection harness breakage.
Remedy: Turn OFF /ON the power. Check connection of the connector with the lower stream machine of the Zfolding machine. Replace the control PWB of the lower stream machine of the inserter.

Code: F1-71

Description: Varistor abnormality. Varistor abnormality is detected on the Z-folding unit control PWB
Causes: A high voltage noise such as lighting surge has occurred, or PWB trouble.
Remedy: Replace the PWB.

Code: F1-72

Description: Z-folding machine EEPROM abnormality. Data write error to the EEPROM on the Z-folding unit
Causes: Control PWB trouble, garbles data due to line noise.
Remedy: Use the simulation to rewrite the data and check again. If the trouble occurs after recheck, replace the PWB.

Code: F1-73

Description: Separation sensor adjustment abnormality. The sensor input value does not become the proper level in the automatic adjustment of the separation sensor.
Causes: Trouble the sensor. Trouble the control PWB.
Remedy: Replace the sensor. Replace the control PWB.

Code: F1-74

Description: Pressure sensor adjustment abnormality. The sensor input value does not become the proper level in the automatic adjustment of the pressure sensor.
Causes: Trouble the sensor. Trouble the control PWB.
Remedy: Replace the sensor. Replace the control PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie