Code :

Code: F0-80
Description: Finisher power cooling fan motor abnormality (FNFAN101)
Causes: Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy: Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.

Code: F0-81
Description: Finisher upper tray fan abnormality (FNFAN103)
Causes: Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy: Use SIM3-3 to check the operation of the upper tray fan. Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.

Code: F0-82
Description: Finisher lower tray fan abnormality (FNFAN104)
Causes: Motor lock, motor harness short/open, control PWB trouble, disconnection of harness or connector.
Remedy: Use SIM3-3 to check the operation of the lower tray fan. Check connection from the control PWB to the fan motor. Replace the control PWB. Replace the fan motor.

Code: F0-83
Description: Finisher paper guide motor section abnormality (FNM120)
Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
Remedy: Use SIM3-3 to check the operation of the paper guide motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

Code: F0-84
Description: Finisher grip section abnormality (FNM116)
Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown.
Remedy: Use SIM3-3 to check the operation of the gripper motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

Code: F0-86
Description: Finisher discharged paper hold motor section abnormality (FNM118)
Causes: Motor lock, control PWB trouble, disconnection of harness or connector, HP sensor breakdown
Remedy: Use SIM3-3 to check the operation of the discharged paper hold motor. Check connection from the control PWB to the motor and the sensor. Replace the control PWB, the motor, and the sensor part.

Code: F0-90
Description: Communication trouble between the stacker second series and the downstream units.
Causes: Communication trouble with the stacker and the downstream unit of the stacker Stacker unit ID setting failure (Setting failure of the DIP switch on the control PWB), noises on the communication line, control PWB trouble, connector connection failure, harness breakage, disconnection of an AC cable to a downstream unit
Remedy: Turn OFF/ON the power. Check connection between the stacker and the downstream unit of the stacker. Replace the control PWB of the downstream unit of the stacker.

Code: F0-91
Description: Stacker second series offset unit abnormality
Causes: Abnormal operation of the offset motor which shifts the stack tray paper exit roller Offset home sensor detection trouble Control PWB trouble, disconnection of connector trouble, motor trouble, sensor trouble
Remedy: Use SIM03-61 to check the operation of the offset motor. Use SIM03-60 to check the offset home sensor signal. Replace the control PWB. Check connection of the connector and harness from the control PWB to the offset motor. Check connection of the connector and harness from the control PWB to the offset home sensor.