Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM200D — Trang 3/7

Code: F2-40

Description: ATC sensor abnormality
ATC sensor value abnormality
Causes: Connector connection trouble
Toner cartridge installation trouble
Sensor breakdown
Remedy: Connect the connector again. Install the developing unit again. Replace the developing unit with a normal one.

Code: F5-02

Description: Copy lamp lighting abnormality
The copy lamp does not turn on.
Causes: Copy lamp abnormality.
Copy lamp harness abnormality.
CCD PWB harness abnormality.
Remedy: Use SIM 5-3 to check the copy lamp operations. When the copy lamp lights up. Check the harness and the connector between the CCD unit and the MCU PWB. When the copy lamp does not light up. Check the harness and the connector between the copy lamp unit and the MCU PWB. Replace the copy lamp unit. Replace the MCU PWB.

Code: F6-00

Description: FAX board communication trouble
FAX board communication error.
Causes: No command can be sent from the MCU to the FAX.
Remedy: Check connection of the FAX board. Replace the FAX board.

Code: F6-10

Description: FAX board trouble
FAX board abnormality detection.
Causes: FAX controller and FAX board memory abnormality.
Remedy: Replace the FAX board.

Code: F6-80

Description: FAX board communication trouble (Protocol)
A break error occurs in communication between the MCU and the FAX board.
Causes: MCU PWB connector connection failure/ Garbled data.
Remedy: Check connection of the FAX board. Replace the FAX board. Reset the machine (Power OFF/ON).

Code: F6-81

Description: FAX board communication trouble (Parity)
A parity error occurs in communication. between the MCU and the FAX board.
Causes: MCU PWB connector connection failure/ Garbled data.
Remedy: Check connection of the FAX board. Replace the FAX board. Reset the machine (Power OFF/ON).

Code: F6-82

Description: FAX board communication trouble (Overrun)
An overrun error occurs in communication between the MCU and the FAX board.
Causes: MCU PWB connector connection failure/ Garbled data
Remedy: Check connection of the FAX board. Replace the FAX board. Reset the machine. (Power OFF/ON).

Code: F6-84

Description: FAX board communication trouble (Framing)
A framing error occurs in communication between the MCU and the FAX board.
Causes: MCU PWB connector connection failure/ Garbled data.
Remedy: Check connection of the FAX board. Replace the FAX board. Reset the machine (Power OFF/ON).
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie