Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM202D — Trang 3/8

Code: E7-11

Description: Shading trouble (White correction)
The CCD white scan level is abnormal when the shading.
Causes: Improper connection of the CCD unit flat cable Dirt on the mirror, the lens, and the reference white plate Copy lamp lighting abnormality CCD unit abnormality MCU PWB abnormality (When occurred in the SPF scan position.) Improper installation of the mirror unit
Remedy: Clean the mirror, the lens, and the reference white plate. Check lighting and the light quantity of the copy lamp (SIM05-03). Check the CCD unit. Check the MCU PWB.

Code: E7-16

Description: Abnormal laser output
When the laser output is stopped, HSYNC is detected.
Causes: Laser abnormality MCU PWB abnormality.
Remedy: Replace the LSU. Replace the MCU PWB.

Code: E7-91

Description: Decode error (FAX print)
When image data sent from the FAX board to the machine are judged as decode error
Causes: Connector connection trouble MCU PWB abnormality
Remedy: Turn OFF/ON the power. Connect the connector again. Replace the MCU PWB.

Code: E7-93

Description: Data communication error (FAX scan)
When data transmission from the machine to the FAX board fails 5 times
Causes: Connector connection trouble FAX PWB abnormality
Remedy: Turn OFF/ON the power. Connect the connector again. Replace the FAX PWB.

Code: F2-40

Description: ATC sensor abnormality
ATC sensor value abnormality
Causes: Connector connection trouble Toner cartridge installation trouble Sensor breakdown
Remedy: Connect the connector again. Install the developing unit again. Replace the developing unit with a normal one

Code: F2-64

Description: Toner supply abnormality
When toner near end is detected with the toner supply time of 50% or less. When the toner supply time exceeds 300%.
Causes: ATC sensor abnormality Toner supply abnormality
Remedy: Replace the toner cartridge. Replace the developing unit.

Code: F2-70

Description: •Improper cartridge (Destination error, life cycle error) •Identific t ion error •Model error •Type error •Destination error •Data abnormality •Misc error
•The destination of the machine differs from that of the CRUM. •The trade mark code of the CRUM differs. •The company code of the CRUM differs. •The boot program model code does not coincide with the CRUM model code. •When the CRUM type is other than genuine/ conversion/production rotation. •The machine destination differs from the CRUM destination.
Causes: CRUM chip defect Improper toner cartridge.
Remedy: Replace the toner cartridge.

Code: F2-74

Description: CRUM chip communication error
An error occurs during communication between the MCU and the CRUM chip. The CRUM identification error occurs.
Causes: CRUM chip abnormality Developing unit disconnection MCU PWB abnormality
Remedy: Replace the toner cartridge. Check installation of the developing unit. Use SIM16 to cancel. Replace the MCU PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie