Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi Sharp MXM260N — Trang 10/11

Code: L8-10

Description: Power abnormality detection trouble
The power status monitoring signal keeps power OFF state after passing the specified time (2sec).
Causes: Circuit around the power status monitoring signal (PSSTS) failure.
Remedy: Check whether power status monitoring signal (PSSTS) on MCU PWB is OPEN or not. Replace MCU PWB.

Code: PF-00

Description: PF trouble
The copy inhibit command from RIC is received.
Causes: Judged by the host.
Remedy: Inform to the host.

Code: U1-01

Description: FAX battery error
The SRAM backup battery voltage on FAX control PWB falls.
Causes: The SRAM backup battery voltage on FAX control PWB falls.
Remedy: Check voltage of the SRAM back up battery. Replace the battery.

Code: U1-02

Description: PANEL LOW battery error
The voltage of the panel clock function battery falls.
Causes: The voltage of the panel clock function battery falls.
Remedy: Check voltage of panel clock function battery. Replace the battery.

Code: U2-04

Description: EEPROM communication error
EEPROM communication error
Causes: EEPROM defect. ICU PWB EEPROM access circuit failure.
Remedy: Check that the EEPROM is properly set. Clear trouble with SIM 16. Replace the MCU PWB.

Code: U2-20

Description: Machine speed code data error
The machine boot speed information is not identical to the model code speed information
Causes: EEPROM defect. SIM operation error.
Remedy: Check for matching of the machine and model information setting in SIM26-57.

Code: U7-00

Description: RIC communication trouble
Error in communication with RIC. Error in communication test after turning on the power or canceling SIM.
Causes: Connector harness contact trouble or disconnection. RIC control PWB trouble. MCU PWB failure. Malfunction by noises.
Remedy: Check the communication cable, connectors from the RIC box to the main body.

Code: U9-00

Description: Operation control PWB communication trouble
Communication trouble between MCU and the operation control PWB
Causes: Operation control PWB connector disconnection Harness failure of the operation control PWB and the MCU PWB
Remedy: Check the connectors and the harness of the operation control PWB and MCU PWB. Check the grounding of the copier. Check ROM on the operation control PWB.
Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie