Mã lỗi Sharp MXM265NE
Description: PCU PWB ROM error
Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. PCU PWB trouble.
Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the PCU PWB.
Description: SCU PWB ROM error
Causes: The firmware version-up is not completed properly by interruption of the power during the version-up operation, etc. SCU PWB trouble.
Remedy: Use SIM49-1 to perform the firmware version-up procedure again. Replace the SCU PWB.
Description: Firmware version inconsistency (MFP - PCU)
Causes: Firmware combination error between the MFP and the PCU.
Remedy: Install the firmware in the all-firmware version-up mode.
Description: Incompatible DSK BOOT and program firmware
Causes: Installation of the normal firmware was performed with a security kit enable.
Remedy: Stop installation of the normal firmware.
Description: Conflict firmware and EEPROM data version (MFP)
Causes: Inconsistency between the MFP firmware version and the EEPROM data version.
Remedy: Check the combination of the firmware.
Description: Conflict firmware and EEPROM data version (PCU)
Causes: Inconsistency between the PCU firmware version and the EEPROM data version.
Remedy: Check the combination of the firmware.
Description: Conflict firmware and EEPROM data version (SCU)
Causes: Inconsistency between the SCU firmware version and the EEPROM data version.
Remedy: Check the combination of the firmware.
Description: MFP image data error
Causes: Image data transfer error in the MFPC PWB. MFPC PWB trouble.
Remedy: Check connection of the connector and the harness of the MFPC PWB. Check or replace the MFPC PWB.