Description: CCD white level error Improper CCD white reference plate reading level for copy lamp lighting
Causes: Flat cable installation failure to CCD unit. Dirt on the mirror, lens, and reference white plate. Copy lamp lighting trouble. CCD unit abnormality. MCU PWB abnormality. (Occurred in the RSPF scan position)
Remedy: Clean the mirror, the lens, and the reference white plate. Check the copy lamp light quantity and its operation. (SIM 5-3) Check CCD unit. Check MCU PWB.
Description: Shading trouble White correction is not completed in the specified number of times.
Causes: Flat cable installation failure to CCD unit. Dirt on the mirror, lens, and reference. white plate. Copy lamp lighting trouble. CCD unit abnormality. MCU PWB abnormality.
Remedy: Clean the mirror, the lens, and the reference white plate. Check the copy lamp light quantity and its operation. (SIM 5-3) Check CCD unit. Check MCU PWB.
Description: Developer adjustment trouble (Over-toned abnormality) An abnormality occurred in execution of automatic developer adjustment. Sample data was detected over-toner.
Description: Developer adjustment trouble (Undertoned abnormality) An abnormality occurred in execution of automatic developer adjustment. Sample data was detected under-toner.
Description: Finisher communication trouble Communication line test error occurs when power is turned on or after the exit of a simulation mode. Error in finisher communication
Causes: Connection trouble or disconnection of the connector and harness between the body and the finisher. Finisher control PWB trouble. Control PWB failure. Malfunction by noises.
Remedy: Canceled by turning OFF/ON the power. Check the connectors and the harness of communication line. Replace the finisher control PWB.